If you have a hardware wallet such as Ledger, Trezor, or KeepKey, but your 24-word seed phrase has one or more errors, BTCRecover can be useful. It is not magic. You still need the full mnemonic, even if it contains mistakes, and you also need at least one public address that was used with that wallet.
This article is a written version of my video: Watch the video.
I want to be very clear about the security side first: using Windows for seed recovery is less safe than using an offline Linux Live CD. If you use this method, treat your recovered seed as potentially compromised. After you recover it, move your funds to a new wallet with a new seed before reconnecting that computer to the internet.

Stuck with a wallet recovery?
I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.
Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.
Why I made this Windows version
In my other BTCRecover videos, I show how to run it in a safer offline Linux environment. That is the method I would normally recommend. But some people are put off by Linux, or they do not want to use a Live CD, or they may be in a stressful situation and need something faster.
That does not mean Windows is safe for seed recovery. It means it can be a less bad alternative than doing nothing, or worse, sending your seed phrase to someone who messages you on Reddit claiming they can help.
Do not send your seed phrase to anyone. If someone asks for it, stop.
What you need before starting
Before you begin, make sure you have:
- Your full 24-word BIP39 mnemonic, even if some words are wrong or uncertain.
- At least one public address that you know was used with that wallet.
- A Windows computer where you can install Python and run command-line tools.
- The BTCRecover ZIP file from the GitHub repository. Links will be in the video description.
- Python 2, not Python 3.
This is important: this setup uses Python 2. BTCRecover does not currently work with Python 3 in this workflow. If you install Python 3 by mistake, you may run into errors.
You also need to know that recovering a seed phrase from only a public address is impossible. You cannot derive the private key from the public key alone. That is why you still need your best guess of the full mnemonic.
Step 1: Download BTCRecover and Python 2
Start with a clean browser session if possible. In the video, I use Edge because we are assuming a basic Windows setup.
Download the BTCRecover ZIP file from the GitHub repository. You can follow the seed recovery quick-start guide on GitHub for most of what you need to do.
Then download Python 2 from python.org. Since this is Windows, choose the 64-bit installer if your system uses a 64-bit version of Windows.

Do not install Python 3 for this process. You need Python 2.
Step 2: Install Python using default settings
Run the Python installer you downloaded. For this tutorial, the defaults are fine. Click through the installation until it finishes.

Once Python is installed, open Command Prompt. You can find it by typing “Command Prompt” in the Windows search bar and opening the app.
Step 3: Install the required PIP packages
In Command Prompt, install the two packages needed for this setup: coincurve and pysha3.
The command is similar to what you would use on Linux. You can copy it from the BTCRecover quick-start guide in the video description, then paste it into Command Prompt and press Enter.

It may take a little while to finish. Wait until the command completes before moving on.
Step 4: Disconnect your network connection
This is one of the most important steps in the whole process.
Before you run BTCRecover, disconnect the computer from the internet. Disable Wi-Fi or unplug the Ethernet cable. The reason is simple: if the machine is compromised, you do not want it leaking your seed while you are recovering it or after recovery has finished.

I would advise that you keep this computer offline until you have recovered your funds and moved them to a new seed. Do not reconnect the internet just because the process is finished. First move the funds safely, then worry about reconnecting.
Step 5: Extract BTCRecover into Downloads
Now extract the BTCRecover ZIP file you downloaded from GitHub. Right-click the ZIP file and choose “Extract All.” For this tutorial, unzip it directly into your Downloads folder.

After extraction, you should see a BTCRecover folder inside Downloads. The exact folder name may include version information, but the idea is that you want to be able to navigate into it from Command Prompt.

Step 6: Do not just double-click SeedRecover
Here is a common mistake: people see seedrecover.py or a similar file and think, “I will just double-click it.”
Do not rely on that.
If you double-click the Python file, it may ask you to select a wallet type, enter seed information, and appear to be working. But in many situations, the double-click method does not let you enter a custom derivation path properly. That can make recovery fail even when your inputs are otherwise correct.
So we are going to run BTCRecover from the command line instead.

Step 7: Navigate into the BTCRecover folder using Command Prompt
Go back to your open Command Prompt window. By default, Windows Command Prompt usually opens in your user folder.
First move into Downloads. You can type cd followed by a space, then start typing down, and press Tab to let Windows complete the path. Then press Enter.
Next, navigate into the extracted BTCRecover folder. Type cd btc recover, or whatever the actual folder name is, use Tab completion if needed, and press Enter.

Once you are inside the folder, type dir and press Enter. This lists the files in the current directory. Check that the BTCRecover files are present, such as btcrecover.py, seedrecover.py, and related documentation or support files.

If the files look right, you are in the correct place to run the recovery command.
Step 8: Run a typo recovery demo
For this tutorial, we use a simple test case. It is looking for one word error, sometimes called a single-word typo. That means one of the words in your mnemonic may be wrong, but it could still be a valid BIP39 word. The tool searches through possible corrections based on your known address and best-guess seed phrase.
In the video, I use a command you can copy from the description. It generates addresses to a limited depth and uses a derivation path suitable for Segwit. If your address starts with 3 and you are looking for the first account connected to that seed, this is probably the derivation path you want to try first.
Paste the command into Command Prompt and press Enter.
You will be asked questions such as whether you have a wallet file. In this example, there is no wallet file, so choose cancel or no. You are using a standard BIP39 wallet. If asked about an xpub key and you do not have one, say no.
Then enter the known public address that you remember. After that, enter your best guess of the mnemonic, including any words you suspect may be wrong.
In the video example, there was a simple one-letter mistake in one word. The tool ran for a short time and found the corrected seed phrase.
Important: do not paste real seed phrases into public places, forums, chat rooms, or support requests unless you are certain they are safe and encrypted. If you need help, use my recovery services page carefully and follow secure communication practices.
Step 9: Move your funds to a new seed immediately
If BTCRecover finds the correct seed phrase, do not sit on it. The next step is to move your funds to a new wallet with a new seed.
Because you used Windows for this process, I want you to treat the recovered seed as potentially compromised. Even if nothing bad happened, the safest assumption is that you should rotate the seed.
You do not necessarily need to buy another hardware wallet just to do this. There are several ways to create a fresh wallet and move funds safely, and I cover those in other videos. But the key point is: recover first, then move the funds to a new seed while the machine is still offline if possible.
Only after your funds have been moved should you reconnect that computer to the internet.
If you are not comfortable doing this yourself
Seed recovery can be stressful, and one wrong assumption about derivation paths, addresses, or word order can waste time or make things more confusing. If you are unsure whether BTCRecover is appropriate for your situation, or if you have already lost access to funds, my recovery services and consultations page explains how I can help.
Bottom line
BTCRecover on Windows 10 can work for a single-word typo or other limited seed phrase errors, especially when you have a known public address and the full best-guess mnemonic. But it is not a safe environment in the same way an offline Linux Live CD would be.
Use this method only if you understand the risk: your recovered seed should be treated as potentially compromised. After recovery, move your funds to a new wallet with a new seed before reconnecting the computer to the internet.
Questions from viewers
Common questions from the comments on this video, with my answers.
What derivation path should I use for different wallet types (e.g., Breadwallet, Native Segwit, Ethereum)?
The correct BIP32 path depends on the specific wallet and address type. For older wallets like Breadwallet using Bitcoin, you might need an 'old' style path such as m/0'/0. For native Segwit addresses (starting with bc1), the standard path is m/84'/0'/0'/0. For Ethereum or similar wallets (like Ronin), use the defaults for that chain, ensuring you format the address correctly (e.g., adding 0x for ETH). Always verify the path matches your specific wallet's configuration.
My seed phrase has multiple typos or words in the wrong order. How do I adjust the command to find it?
If you suspect more than one typo, increase both the –typos and –big-typos parameters in the command. Start with 2 for both if you think there are two errors; if that fails, try 3, but be aware this can take a day or more to run. If you have mixed up the rows or columns of a 24-word seed, BTCRecover cannot automatically brute-force the permutation; you will need to manually try the possible arrangements yourself.
I am getting installation errors like 'pip not recognized' or missing modules. What should I do?
Ensure you have installed all required PIP packages and dependencies. If you see errors about missing modules like 'Crypto', it usually means the requirements were not installed correctly. Re-run the installation of requirements. Note that this specific video tutorial is outdated; for current issues, follow my most recent videos which cover updated Python versions and forks of BTCRecover. (Apps and tools change, so check the current version if something looks different.)
Can I recover a seed if I have lost all the words, or only have a password?
If you have lost all the seed words, they are unrecoverable via this method. You must move funds off the device before reinitializing it. However, if you have a wallet file and a partial idea of the password (for wallets that don't use seed phrases, like some Dogecoin Core setups), you can use BTCRecover to brute-force the password.
The tool found a matching seed instantly, but it seems incorrect or suspicious. Is this a bug?
If the tool finds a match instantly with the exact same phrase, it likely means the derivation path used by the tool matches the one used by your hardware wallet. This is not necessarily a bitflip error. Double-check the derivation path against a trusted source like Electrum to ensure you are looking at the correct account path.
Stuck with a wallet recovery?
I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.
Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







