, , ,

Sweep Paper or Hardware Wallet Keys Into Coinomi

If you have funds sitting on an old paper wallet, a Bitcoin ATM receipt, a BIP39 seed, or even a hardware wallet, there may be times when you do not want to import the whole thing into a new wallet. Sometimes you just need access to one address, one private key, or one small batch of coins.

That is exactly what this guide covers: how to sweep individual private keys into Coinomi on your phone, without importing your full seed. I also cover the important security setup, the derivation path choices, and a common gotcha that can confuse people after they do a partial sweep.

Watch the video if you want to see the process on screen. The written version below is meant to stand on its own, so you can follow it step by step without relying on the video.

Why sweep individual keys into Coinomi?

Sweeping a private key means moving all available funds from one address or wallet into another destination. In this case, we are sweeping from an external source into your Coinomi mobile wallet.

This is useful in a few common situations:

  • You bought some crypto at a Bitcoin ATM and got a paper receipt with a private key on it.
  • Someone gave you a paper wallet as a gift.
  • You have a BIP39 seed written down somewhere and want to access only part of the funds.
  • You use a hardware wallet but need temporary or partial access to some coins without importing the full seed into another app.

Coinomi is a good option for this because it supports multiple coin types, runs on Android and iOS, is free, and is open source. If you are looking for a mobile wallet that can handle several cryptocurrencies in one place, it is a practical starting point.

The main idea here is simple: reveal the private key for one address in a secure environment, scan it into Coinomi using its sweep feature, and let Coinomi move the funds to your account.

When sweeping may not be ideal

Before you start, there is one important trade-off: fees.

When you sweep individual keys with Coinomi, each swept address can incur its own transaction fee. That means if you have many addresses holding funds, sweeping them one by one can become expensive and time-consuming.

If your wallet has been active for a long time and contains lots of different addresses, it may be more efficient to import the entire seed into a desktop or mobile wallet that supports full seed recovery. In the video, I mention Electrum as an example of this kind of approach.

But there is a security catch: importing your full seed gives you much broader access, but you also lose some of the isolation and protection that comes from keeping funds on paper or in a hardware device. A paper wallet or hardware wallet keeps sensitive material offline for long periods. Once you import the full seed into an app connected to your daily environment, your security model changes.

So use individual sweeping when it makes sense: one address, a few addresses, a small amount, or a situation where you want limited exposure rather than full seed access.

Step 1: Set up Coinomi and add the account type

First, install Coinomi on your phone if you have not already done so. It is available for Android and iOS.

Once installed, set it up normally and make sure you have an account created for the coin type you want to sweep into. For example, if you are sweeping Bitcoin, you need a Bitcoin account in Coinomi. If you are sweeping Litecoin, you need a Litecoin account.

You can search for the coin inside the app and add the relevant account type before you begin. This matters because when you run the sweep, you will choose which Coinomi account receives the funds.

Coinomi wallet account list on an Android phone
Adding or searching for a coin type in Coinomi

Do not rush this part. If you select the wrong destination account later, your funds may end up in a different sub-account than you expected. It is still recoverable inside Coinomi if you know where it went, but it can be confusing at first.

Step 2: Use Ian Coleman’s BIP39 tool safely

If your private key comes from a BIP39 seed rather than a single standalone paper wallet key, the next step is to reveal the address and private key in a controlled environment.

I recommend using Ian Coleman’s BIP39 Mnemonic Code Converter for this kind of task, but only if you do it carefully. The most important rule is: do not type your seed into an ordinary internet-connected desktop just because it is convenient.

You want to use an air-gapped computer. That means a machine that is not connected to the internet while you enter your sensitive data. Even better, I recommend using an amnesic environment, such as Tails Linux. Tails is designed so that much of what you do during that session does not persist after reboot. It wipes volatile memory and temporary files in a way that makes it harder for traces to remain on the machine.

I have made other videos about setting up environments like this using free tools and a USB stick, so if you are new to Tails or air-gapped setups, look into those before doing anything with real funds.

The basic principle is simple: keep your seed away from malware, keyloggers, and remote attackers for as long as possible.

Ian Coleman’s BIP39 Mnemonic Code Converter screen
Using Ian Coleman’s BIP39 tool in a secure environment

Step 3: Enter your seed and passphrase correctly

Once you are inside your air-gapped, amnesic environment, open Ian Coleman’s BIP39 tool.

Enter your mnemonic seed carefully. Typos here can lead to the wrong addresses or no funds at all. If you are using a physical USB keyboard with an air-gapped machine, make sure it is clean and trusted. If possible, use a hardware keyboard that has not been exposed to unknown software.

Next comes the passphrase field. This is where people often get confused.

The BIP39 passphrase is not:

  • the PIN you type on your Trezor or Ledger every time you unlock it,
  • the password you use for Ledger Live,
  • a wallet app login password,
  • or any other generic “wallet password.”

It is specifically an optional 25th word used with BIP39 seeds. If you do not know whether you have one, leave that field blank. In many cases, people who wrote down twelve or twenty-four words did not create a separate BIP39 passphrase at all.

For the demo in the video, I use a passphrase from previous videos, but for your own wallet, only enter it if you are certain it is part of your recovery setup. If in doubt, leave it blank and check whether the resulting addresses match what you expect.

Step 4: Choose the coin, account type, and derivation path

After entering the seed, select the correct coin from the dropdown menu. In the video example, we are sweeping Litecoin, so that is the coin selected.

You will then see a list of possible addresses. The critical thing you need to know is which account type or derivation path your original wallet used.

Here is the practical breakdown:

  • BIP44 is usually the legacy address format.
  • BIP49 is generally Segwit for many wallets.
  • BIP84 is native Segwit, often associated with newer wallets and modern default setups.

If you have no idea which path to use, BIP44 may be worth checking first if the coins have been sitting in an older wallet for a while. But do not assume that one path will always work. The safest approach is to compare the generated addresses against any addresses you already know from your original wallet, receipt, or previous transaction history.

If you can see a matching address with a balance, you are on the right track. If not, try another relevant derivation path until you find the correct one.

In the video demo, we sweep the BIP44 address because the process is the same for all of them once you have found the right one.

Step 5: Find the private key QR code

Once you have located the correct address in Ian Coleman’s tool, hover your cursor over it. You will see a QR code representing that public address. That is not what we want to scan into Coinomi for sweeping.

Instead, move your cursor over the private key field. A new QR code appears. This one represents the private key for that specific address or account path.

This is the QR code you will scan into Coinomi.

Be careful here: do not photograph this on your phone camera if you can avoid it, and do not copy it into a regular notes app, cloud document, or screenshot folder on an internet-connected device. The whole point of doing this in an air-gapped environment is to keep the private key isolated from normal online exposure.

If you are using a second offline machine with a camera, that can be one workflow. If not, use whatever method keeps the private key as protected as possible while still allowing Coinomi to read it. The goal is to get the QR code into Coinomi’s sweep feature without leaving unnecessary copies behind.

Step 6: Scan the private key QR code into Coinomi

Now switch to your phone and open the Coinomi account type where you want the funds to land.

Tap the little dots in the top corner of the account screen, then choose Sweep Wallet.

You will be asked which account the swept funds should go into. Select the correct destination account inside Coinomi.

Then tap the QR code button and scan the private key QR code from your offline environment. After that, tap next.

Coinomi will work out how much is available at that address and calculate the transaction fee. Review the details carefully:

  • Is the amount what you expected?
  • Is the destination account correct?
  • Is the fee acceptable for this sweep?

If everything looks right, confirm the transaction. Coinomi will broadcast it to the blockchain. After a short while, depending on network conditions and confirmation times, the funds should appear in your selected Coinomi account.

The change-address gotcha after sweeping

This is the part I want you to remember most clearly.

If you sweep only part of the funds from an address into Coinomi, the remaining balance does not automatically stay on that old private key or return to the original paper wallet address. Instead, it gets sent to a change address inside Coinomi.

That makes sense technically: when a transaction spends from one input and sends some amount to your destination, any leftover value must go somewhere. In this case, it goes to Coinomi’s change address for that account type.

This matters if you were planning to keep the unused funds on your old paper wallet or hardware-wallet address. You cannot assume they remain there after a partial sweep.

If you want those remaining funds back on a fresh paper address or another external destination, you need to send them manually from Coinomi to that new public address when you are done. Choose a clean address you have not used before if that is your goal.

In short: sweeping can move coins into Coinomi easily, but it changes where the leftover funds live. Plan for that before you confirm the transaction.

A practical security checklist

Before you sweep anything with real value, run through this quick list:

  1. Confirm which coin type and account path you need.
  2. Use an air-gapped device to reveal addresses and private keys.
  3. If possible, use Tails or another amnesic environment.
  4. Do not enter a BIP39 passphrase unless you know it is actually part of your recovery setup.
  5. Match the generated address against a known address from your old wallet or receipt.
  6. Scan only the private key QR code into Coinomi, not just the public address QR code.
  7. Choose the correct destination account inside Coinomi before confirming.
  8. Understand that leftover funds will go to a Coinomi change address, not back to the original paper address automatically.

If you are unsure whether your seed is being used with the right path, or if you do not want to risk making a mistake while recovering old funds, it may be worth getting outside help before broadcasting anything. You can find more about that on my recovery services and consultations page.

Conclusion

Sweeping individual private keys into Coinomi is a useful technique when you need access to specific funds without importing an entire seed. It works well for paper wallets, Bitcoin ATM receipts, BIP39 seeds, and even limited access from hardware-wallet-derived addresses.

The key is doing it carefully: use the right derivation path, keep your seed handling offline as much as possible, scan only what you need into Coinomi, and understand where change funds will end up after the sweep.

If you have just one or a few addresses to move, this can be fast, practical, and relatively low-risk when done properly. If you have many addresses with balances, though, compare the fees against the convenience of importing the full seed into another wallet first. Security, cost, and control all matter here.

Questions from viewers

Common questions from the comments on this video, with my answers.

Which Bitcoin address type should I use when sweeping to minimize fees and ensure compatibility?

You should always go with Segwit (starting with '3') or Native Segwit (starting with 'bc1'). These are better for lower fees and network efficiency. While some older exchanges or lesser wallets might not recognize native-segwit addresses yet, a decent wallet will support sending from any address type to any other. Compatibility has improved significantly since the video was made. (Apps and tools change, so check the current version if something looks different.)

Is Coinomi still an open-source wallet?

No, Coinomi is no longer open source. They pulled their source code a couple of years ago. If you want to verify this history, it was discussed on the Bitcoin.org GitHub. I am looking into seeing if I can build an old version to check if it still works with their back-end servers, but currently, it is closed source. (Apps and tools change, so check the current version if something looks different.)

If I only sweep part of my funds, where does the remainder go?

When you sweep an address, you move all funds off that specific address into Coinomi. If you don't spend the whole amount immediately, the remaining balance stays in your Coinomi wallet; it does not automatically return to the original paper wallet or hardware wallet address. You don't need to move it back unless you prefer not to store large amounts in Coinomi.

Why isn't the 'sweep wallet' option available for Ethereum or ERC20 tokens in Coinomi?

The sweep feature is disabled for Ethereum because there isn't a way to sweep all ETH and tokens in one go. Additionally, you need an ETH balance to send tokens, so the ETH must be sent last. For these assets, you will need to import the private key into a different tool like MyEtherWallet or MetaMask, send the ERC20 tokens first, and then send the ETH. (Apps and tools change, so check the current version if something looks different.)

Should I use Bitaddress.org to decrypt BIP38 keys or generate new wallets?

I do not recommend using Bitaddress.org for generating new single-key paper wallets in 2021, as they are a security disaster. Instead, generate a seed in Electrum using Tails Linux. However, if you are just using it air-gapped to decrypt an old BIP38 key to get crypto off an old wallet, it is acceptable because there is nothing malicious it can do in that isolated environment. (Apps and tools change, so check the current version if something looks different.)

Stuck with a wallet recovery?

I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.

Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides