So you picked up a KeepKey on sale or through the ShapeShift KYC process, and now you want to set it up properly. If this is your first hardware wallet, the default KeepKey/ShapeShift flow can feel frustrating at times. In this video, I walk through the standard 2019 setup process, including firmware updates, PIN setup, writing down the recovery sentence, and a few common connection problems with ShapeShift and the KeepKey Chrome client.
The main thing I want to stress here is this: do not skip the backup step, and do not assume your written seed phrase is correct until you have tested it. The standard workflow does not include verifying the seed phrase in an obvious way, so we will use the KeepKey client to run a dry-run recovery test.
Start by reading the full get-started page
When you open the box, the instructions point you to the KeepKey get-started page. The device screen also shows the setup URL.

Before clicking anything, read the instructions all the way down. If you jump straight to pairing, you may hit a dead end because the device firmware still needs updating first.

Install the KeepKey updater before pairing
This is one of the most common stumbling blocks. If you try to pair the device immediately, ShapeShift may not detect it properly. You need to use the updater link on the get-started page first.

Download and run the KeepKey updater from the correct page. Follow the prompts for a new device, including any bootloader update steps. You may be asked to disconnect and reconnect the KeepKey while holding the button when prompted. Do not skip this part just because it feels fiddly. It is part of getting the device into a state where ShapeShift can initialize it properly.

Once the firmware and bootloader updates are complete, reconnect the device as instructed. The screen should confirm that the update process has finished.

Pair the KeepKey with ShapeShift
After updating, return to the get-started page and try pairing again. You should now be able to connect the device and begin initialization. If you want, label the device so it is easier to identify later in your browser wallet.
There is an important note on the setup screen: if you cannot get this ShapeShift initialization process working, use the KeepKey desktop client for recovery from a backup sentence. I found that recommendation useful, because the KeepKey client can be more reliable for detecting and setting up the device.

Choose a longer PIN
Next, you will set a PIN. This is the code you enter each time you connect and use the device. I strongly recommend using a longer PIN rather than a short one. A longer PIN adds a simple layer of protection if someone physically picks up your wallet and tries to spend from it.
The KeepKey uses a randomized on-screen keypad, so the numbers move around when you confirm the PIN. This helps reduce some keyboard-related risks during entry. If you forget the PIN later, you can recover from the seed phrase, which is why the backup step matters so much.
Write down the recovery sentence carefully
This is the most important part of the entire setup. Your recovery sentence is your one and only backup. It is not a convenience feature. It is the thing that actually represents access to your funds if the device fails, gets lost, or needs to be reinitialized.
The KeepKey comes with a recovery sheet. Write all 12 words clearly on it. Do this in private. Do not do it with someone looking over your shoulder, and do not do it with a webcam pointed at you. Avoid doing it in a public place where people can watch or listen.
A few practical notes:
- Use pencil if possible, because pencil is less likely to fade than some pens.
- Write clearly enough that another future-you will understand the words without guessing.
- Keep the sheet on durable material so you do not leave an impression of the words underneath.
- Do not photograph it and assume that is a safe backup.
- Do not save it in a cloud text file, email, or computer document.
- Never type your recovery sentence into a website unless you are 100% sure what you are doing.
Most hardware wallet scams try to trick people into entering their seed phrase on a compromised device or website. Your written backup should stay offline and private.

Double-check what you wrote down
After writing the recovery sentence, double-check it carefully. Do not just glance at it and assume it is right. Your brain likes shortcuts, and those shortcuts can cause exactly the kind of tiny error that makes a backup useless later.
A good approach is:
- Read the words from top to bottom against the device screen.
- Read them from bottom to top.
- If you want extra confidence, read individual words letter-for-letter backward while comparing them to the screen.
Take your time here. Once setup is complete, you will not see that recovery sentence again on the device in normal use. A single missed letter can create a completely different set of keys.
The missing step: verify your backup with a dry-run recovery
Here is where I part ways slightly from the standard ShapeShift flow. After initialization, it is easy to close the setup screen and start using ShapeShift as a wallet or exchange. But there is an important security step that KeepKey’s default process does not make obvious enough: you should verify that your written backup actually matches the device.
The KeepKey client has a feature for testing the recovery sentence. This is useful because it lets you do a dry-run recovery without destroying anything. If your written words match, the client will confirm that the seed is valid and matches the one in the device.
This matters because if there is any error in your backup, you want to know now while the device still holds the original seed. If the test fails repeatedly, you may need to reinitialize the device with a new seed and start again. That is far better than discovering the problem years later when the original device no longer works.

During this test, you type each word using the displayed letter substitution shown by the device and app. This is designed to reduce the risk that a keylogger or screen recorder can capture your real seed phrase directly from normal typing. If a word cannot be found in the available options while entering it, that usually means there is a typo in what you wrote down.
If everything matches, store your backup securely. Do not leave it lying around. Do not throw it away and try to memorize it as your only copy. The paper or metal backup is more important than the hardware wallet itself. If you are already in a situation where funds may be at risk because of a bad recovery attempt, my recovery services page covers when to seek help and what I can assist with.
Using ShapeShift without creating an account
Once the device is initialized and your backup has been verified, you can use the ShapeShift interface as a wallet. You do not need to create an account just to send or receive assets. An account is more relevant if you want trading features and other exchange-related functionality.
If you only want a simple web-based wallet experience, you can bookmark the ShapeShift beta site and connect your KeepKey there. The top of the page should show that your device is connected.
Receiving Litecoin with address verification
When receiving funds, do not assume the address shown in your browser is safe just because it looks normal. Browsers can be compromised, and a malicious script could try to replace or alter what you see on screen.
For receiving, use the “Show on Wallet” option so the same address appears on the KeepKey itself. Compare the address on the device with the one in the browser. They should match exactly before you share the address or ask someone to send funds.

Sending Litecoin with on-device confirmation
Sending works similarly. Enter or scan the destination address, choose the amount, and continue to signing. Before you approve anything, check that the recipient address shown in the browser matches the recipient address displayed on the KeepKey screen. Also confirm the amount is what you expect.
This step protects against a compromised browser trying to redirect funds by altering the displayed destination address. If anything looks wrong, stop. Do not sign it.

Common issues I ran into
A few problems stood out during this setup:
- ShapeShift not detecting the KeepKey: This often happened when the updater had not been run first. Use the updater link before trying to pair.
- Bootloader update prompts: Follow them carefully, including disconnecting and reconnecting while holding the button when asked.
- KeepKey Chrome client stuck on “Loading Accounts”: I found this could happen even after reinstalling or rebooting. In my case, running a VPN allowed the client to load accounts properly, despite general support advice suggesting you avoid using one. This was not a clean fix, but it worked for me in testing.
- No obvious seed verification step: The standard ShapeShift flow does not make backup verification prominent enough. Use the KeepKey client’s test recovery sentence feature after setup.
Bottom line
The default KeepKey and ShapeShift process can work, but it has rough edges. Read the full instructions before pairing, update the firmware first, use a longer PIN, write your recovery sentence clearly in private, verify that backup with a dry-run recovery, and always confirm addresses on the device before receiving or sending funds.
If you get stuck with the ShapeShift platform, remember that KeepKey can also be used with other wallet software. The most important rule is simple: protect the recovery sentence, test it while you still can, and never trust what appears in a browser without checking the hardware screen when money is involved.
Questions from viewers
Common questions from the comments on this video, with my answers.
What should I use to access my KeepKey now that the Chrome app is discontinued?
The Chrome client was discontinued in late 2019 and no longer works with current firmware. You have two main options: use the Shapeshift web platform (beta.shapeshift.com) or, preferably, use third-party software like Electrum for Bitcoin, MyEtherWallet for Ethereum, Electron-Cash for BCH, or Electrum-LTC for Litecoin. These work directly with your device without needing to enter your seed phrase into a computer. (Apps and tools change, so check the current version if something looks different.)
Is it safe to use the KeepKey with Shapeshift, or should I avoid their software entirely?
I have been consistently unimpressed with Shapeshift's reliability and support. While you can use it, many users report issues with loading screens, missing accounts, and poor customer service. For the best experience and security, I recommend avoiding their proprietary software entirely and using independent wallets like Electrum instead. The hardware itself is solid, but the stock software support has been terrible.
My KeepKey is stuck in 'Firmware Update Mode' or won't connect. How do I fix this?
First, ensure you are not holding the button while plugging it in; if you hold the button, it forces firmware update mode. Try connecting it to a USB phone charger to see if it boots to the logo normally. If it does, the issue is likely with the software connection. Since the Chrome app is dead, try using Electrum or the Shapeshift web interface. If it still doesn't pair, check your browser settings (some users found success switching from Chrome to Brave) or verify that your operating system recognizes the device properly.
Can I use my KeepKey on an iPhone?
No, you cannot use any USB-based hardware wallet (like the KeepKey, Trezor, or Ledger Nano S) with an iPhone. If you need mobile compatibility, you would need to look at Bluetooth-enabled devices like the Ledger Nano X or Cobo Vault Pro. Note that mobile support for other brands like Trezor is also very limited or non-existent on iOS.
Why is the KeepKey so cheap compared to other hardware wallets?
KeepKey is often sold at a loss or below cost because they make their money through the Shapeshift exchange ecosystem. They push users toward trading on Shapeshift, which requires KYC verification. It’s a business model where the hardware is just the entry point to their exchange services, rather than a standalone premium product.
How do I verify my recovery seed if the dry-run option is missing from the interface?
Shapeshift removed the easy 'dry-run' recovery feature from their web interface. To verify your seed without restoring the whole device, you currently have to use the command-line Python-Keepkey client. Alternatively, you can wipe the device and perform a full restore to test the seed, but the command-line method is less disruptive if you are comfortable with it. (Apps and tools change, so check the current version if something looks different.)
Stuck with a wallet recovery?
I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.
Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







