I have never used an engraver before this test, so take that into account when reading my first impressions. The Crypto Key Stack is a metal seed-phrase backup system designed for people who want more than one durable copy of their recovery words. It uses engraved anodized stainless steel plates rather than stamped letter tiles, and it can hold multiple seeds in one stackable format.
Watch the video if you want to see the unboxing and engraving process in action. This article is a standalone written version for people who prefer reading, or who may not be able to watch the video later.
Why use redundant seed backups?
If your crypto backup is just one piece of paper, you are relying on that paper surviving fire, water, theft, loss, and time. That can work, but it is not my preferred approach.
I prefer redundancy: multiple copies, stored in different locations. You may also need more than one seed if you use a hardware wallet, a mobile wallet, an altcoin wallet, or a multi-sig setup. The problem with many metal backup products is that they can become expensive very quickly when you are backing up several seeds.
That is where the Crypto Key Stack becomes interesting. It is not just a single-seed plate. It is a stackable system where you can keep multiple engraved plates together, label them, and store different seeds in one physical object.
What comes in the box?
The kit includes the metal plates, screws, batteries for the engraver, tamper-evident stickers, and the electric engraver itself. The idea is that you do not need to buy a separate engraving tool just to use it once. You get enough hardware to make several backups and still keep the engraver for future work.

This matters because backup tools often sit in a drawer until something goes wrong. If the tool is useful after the initial setup, it feels less like a disposable gadget and more like part of your security kit.
Installing batteries and setting up the engraver
The first practical issue is getting the engraver working properly. The included documentation was not especially detailed for someone who had never used an engraver before, so I treated this as a hands-on learning exercise.
1. Install the batteries
Place the batteries into the engraver body and make sure they are seated correctly. In my first attempts, the tool stopped as soon as I applied pressure. That was not because the plates were too hard; it was because I was pressing down too much.
2. Insert the tip
Line up the dot key or tip with the opening, twist it in slightly, and release it so it seats properly. It is a bit fiddly at first, but once it stays on, you are ready to test it.
3. Test before touching a real seed plate
Run the engraver without pressing hard. If it stalls immediately when you apply downward force, stop and reduce your pressure. The goal is not to carve into the metal. You only need to scrape away the black anodized finish so the stainless steel underneath shows through.
This was the biggest lesson from the whole setup: light pressure beats heavy pressure.
Engraving BIP39 words onto the plate
The plates are designed for structured seed phrases, especially BIP39 mnemonics. You hold the engraver like a pencil and lightly remove the black finish to mark each word.
For a 12-word seed, you can use one side of a plate. For a 24-word seed, you would engrave additional words on the back or another plate, then assemble the stack with screws.
I would strongly recommend doing a practice run first. Use a spare plate if your kit includes one. Work out:
- How much pressure stops the motor from stalling.
- How slowly you need to move across each letter.
- How readable the letters are after wiping away metal dust.
- Whether you can write full words clearly enough that they could be recovered later by someone who does not know your handwriting.
My first attempt was slower and less comfortable than it needed to be because I overworked the letters and pressed too hard. The second attempt was much better, partly because I had learned the pressure setting and partly because I used rechargeable batteries that handled the load without stalling.
The key point is that this tool does not need to eat into the metal. It only needs to remove enough anodized coating for the letters to be visible. If you are forcing the engraver down until it stops, you are pressing far too hard and risk burning out the simple DC motor inside.
Assembling plates with screws and tamper stickers
Once your words are engraved, you can assemble the stack. For a basic setup, you sandwich the relevant plates together and secure them with the included screws.
If you want tamper evidence, apply the provided stickers across the screw holes. Write down or note the sticker number so you have something to check later. If someone opens the stack, the stickers should show that it has been disturbed.

This is useful when you are storing multiple seeds in one physical object. You can label each seed or group of plates by wallet type, location, or purpose. For example, you might keep one copy for a hardware wallet, another for a mobile wallet, and another for an altcoin-related setup. The exact labels are up to you, but the system supports that kind of organization.
Choosing short vs long screws for future expansion
The kit includes different screw lengths. Short screws are fine if you know your stack will stay small. Longer screws make more sense if there is any chance you will add more plates later.
My practical advice is simple: if you think there is even a small chance you will expand the key stack in the next year or two, use the longer screws now. You can always deal with the fact that they stick out slightly. It is much less annoying than losing short screws and having to rebuild or replace them later.

The trade-off is minor. A little protrusion from long screws is not a security problem in most storage situations. Missing screws or an unstable stack would be more annoying.
Durability of the anodized stainless steel plates
One advantage of engraved metal backups over stamped tile systems is that there are no loose letter pieces to fall out, bend, or get lost if the plate is damaged. Even if the object gets bent, scratched, or exposed to rough conditions, the letters remain in place.
The Crypto Key Stack uses black anodized stainless steel plates. The black finish is not just paint sitting on top of the metal. It is bonded using an industrial process, which helps it resist flaking and damage better than a simple painted surface would.

This matters because backup media are often stored in places where they may see heat, moisture, corrosion, or physical abuse. You want the letters to remain readable even if the plate itself has been damaged. In my testing, the engravings were still legible after rough abrasion with steel wool, including areas where I had engraved more lightly than others.

Practice engraving and writing full BIP39 words
If you are using this for a standard BIP39 seed phrase, I would strongly recommend writing the full word wherever possible. This is especially important if your handwriting is not beautiful or if some letters become ambiguous after wear.
BIP39 mnemonics come from a fixed word list. That gives you an advantage when checking unclear letters. If one letter looks uncertain, you can compare it against the official BIP39 English word list and work out which valid word was intended.
That does not mean you should be careless. It just means that full words make recovery more forgiving than partial or abbreviated text.
A few practical engraving tips:
- Practice on a spare plate first.
- Use light, consistent pressure.
- Move slowly enough to keep the letters clean.
- Wipe away dust before judging legibility.
- Write full BIP39 words when you can.
- Check every word against your source seed phrase after engraving.
The second attempt in my video was noticeably better than the first, even though it used smaller and thinner letters. Once I understood how little pressure was needed, the process became faster and less painful on the hand.
Seed phrases vs passphrases
This system is well suited to structured BIP39 seed phrases because those words follow a known structure: they come from a defined list, usually in groups of 12 or 24 words.
I would not recommend relying on this for arbitrary passwords or free-form BIP39 passphrases without the same kind of rigid structure. If there is no fixed word list to help resolve ambiguous letters, an unclear engraving becomes much harder to verify safely.
In other words: if you can cross-check each word against a known mnemonic list, this works well. If you are engraving something with no predictable structure, you need to be far more careful about legibility and verification.
Adding private context information
One useful advantage of the Crypto Key Stack over some standard cassette-style backups is that you can add contextual notes on the plates while keeping them inside the assembled stack.
For example, you might engrave or note:
- The wallet type associated with a seed.
- The derivation paths used.
- Which cryptocurrencies were stored under that seed.
- A short description of what the seed is for.
- Any other non-secret context that will help you understand the backup years later.

This is not about storing secrets in a dangerous way. It is about making sure future-you understands what the seed was for without having to guess. If you have several seeds stored across different locations, it is easy to forget which one belongs to which wallet or setup. Context notes reduce that risk.
Be careful not to write anything that would make recovery easier for an attacker if they already had access to your funds. The goal is helpful context, not a complete instruction manual for someone who should not have the backup in the first place.
Dry-run recovery and final thoughts
After you create any new seed backup, verify it. Do not just assume that what you engraved matches what you intended. Check every word carefully, then go one step further and perform a dry-run recovery on a hardware wallet or other appropriate device using your newly created backup.
A dry run means testing the recovery process in a safe way without putting real funds at risk. It confirms that the words are correct, that the derivation path is right, and that you actually understand how to recover from that specific backup. If you need help with this kind of security review or recovery planning, my recovery services page covers that type of support briefly.
The Crypto Key Stack is not the only option in metal seed backups. Products like Billfodl and Cryptosteel cassettes are also well known in this space. The difference here is that the Crypto Key Stack is built around engraved plates and a stackable format, which can be more practical if you need to store multiple seeds together without buying many separate cassette-style devices.
Conclusion
If you only have one seed and want a single simple backup, there are other options. But if you already use several wallets or want geographically separated copies of the same seed, the Crypto Key Stack is a sensible option. It supports redundancy, labeling, tamper evidence, and multiple seeds in one compact physical object.
My main advice would be: practice before engraving a real seed phrase, use light pressure with the included engraver, write full BIP39 words where possible, choose screw lengths based on future expansion, add useful private context notes, and always verify your backup with a dry-run recovery. Done carefully, this can become a practical part of a long-term crypto storage plan rather than just another gadget that sits unused in a drawer.
Questions from viewers
Common questions from the comments on this video, with my answers.
Is the Crypto Key Stack still a good option in 2021, or are there better alternatives at a similar price?
It is still a great option if you want multiple seed backups. However, the Cobo tablet punch is also very affordable now (around $24 for a single backup), so it's worth considering depending on your needs. (Apps and tools change, so check the current version if something looks different.)
How does the Crypto Key Stack compare to Black Seed Ink?
It depends on what you are looking to back up. The Key Stack is certainly better for things like your passphrase. For standard seed phrases, some users prefer non-electric tools like Black Seed Ink because they find manual etching easier and don't require practice with an electric engraver.
Does the affiliate link provide a discount code for buyers?
No, I don't think there is any discount code automatically linked to the affiliate link; it is just a kickback for me. If you find a separate discount code, you can probably add that as well, though note that previous codes stopped working when the vendor switched website platforms. (Apps and tools change, so check the current version if something looks different.)
Why do the screws stick out from the device?
Yes, the way they stick out is not as nice and flush as some other alternatives. Unfortunately, this is unavoidable with the stock thumbscrews included with the product.
Is writing the seed phrase on paper and storing it in a bank safety deposit box a valid backup strategy?
Yes and no. As long as you have the discipline to only handle it at the bank (not taking it home where it could be damaged) and write it with something that won't fade or deteriorate over time (standard pen on paper might not last), it works. Redundant backups in two locations is far better than a single indestructible one.
Choosing a hardware wallet?
See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.
Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







