If you have BNB, pegged Bitcoin, or pegged Ethereum stuck on Binance Smart Chain, do not just send it to an exchange address because the coin name matches. That can permanently lose your funds. In this guide, I’ll show a safer way to move assets from BEP20 to BEP2 and then deposit them correctly, without relying on Binance.com or Binance Bridge where those options are unavailable.
Watch the video for the full walkthrough. This article is a written version of that same process, with the important warnings called out clearly.
Why BEP2, BEP20, and ERC20 are not interchangeable
The biggest problem here is language. Exchanges often show “network options” like BEP2, BEP20/BSC, Bitcoin, or ERC20, but a tokenized version of an asset is not the same thing as that asset on its native chain.
For example:
- BNB is the native fee token on Binance Chain and Binance Smart Chain.
- If you have BNB on Ethereum, it is an ERC20 token representation.
- ETH is native to the Ethereum network.
- If you withdraw ETH from Binance using BEP2 or BEP20, you are usually moving a pegged, IOU-style version of Ethereum, not real Ethereum.
This matters because exchanges may support “BTC” on one network but not another. They may support “ETH” on ERC20 but require a memo for BEP2 deposits. If the exact network and deposit requirements do not match, your funds can disappear from your control.

A simple rule: never assume that “same coin name” means “same asset.” Check the network, check the deposit address, and if a memo or tag is required, include it.

The core risk: sending the wrong network to an exchange
If you send a Binance Smart Chain version of a token to an exchange deposit address that does not support that exact network, you can lose it. This is especially dangerous when people see “BTC” or “ETH” and think they are safe because the name matches.
The situation gets worse with BEP2 deposits. Many BEP2 deposits require both an address and a memo field. If you send from Binance Smart Chain directly to an exchange, there may be no way to attach that memo correctly. That is why the safer route in this guide is:
- Move funds from your own BEP20 wallet to your own BEP2 wallet first.
- Then deposit from your BEP2 wallet to the exchange using the correct address and memo.
This avoids sending unsupported tokens directly to an exchange and gives you a controlled intermediate step.
Set up the Binance Chain Wallet extension
The first method uses the Binance Chain Wallet browser extension. It is useful because it can work with multiple networks, including Binance Smart Chain and Binance Chain, and in some cases can use the same Ethereum-compatible address across supported networks.
You have a few setup options:
- Use it directly with a Ledger if your hardware wallet supports that workflow.
- Import an existing software wallet seed, such as from MetaMask, so you get the same address.
- Create a new wallet inside the extension and use it only as an intermediary wallet.
If you import a known seed, double-check that the address matches what you expect before moving any meaningful amount. If you are using a hardware wallet that does not support the plugin well, treat the extension as a temporary holding area: send funds in from your secure wallet, do the cross-chain move, then forward the assets to your exchange or final destination.

One important detail: this wallet can let you switch between supported networks, and the same address may be valid on more than one of them. That is helpful, but it also means you need to be careful about which network you are actually sending from before you confirm a transaction.
How to move BEP20 funds to Binance.US using BEP2
This section assumes your assets are currently on Binance Smart Chain and you want to deposit them to Binance.US. The key point is that you should not try to send directly from BEP20 to the exchange if the deposit requires a BEP2 address and memo. You need to move the funds onto Binance Chain first, using your own address as an intermediate step.
Step 1: Make sure you have BNB for fees
You need BNB on Binance Smart Chain to pay transaction fees while moving assets from BEP20 to BEP2. If you do not have a small amount of BNB available for gas, the process will not work smoothly.
Step 2: Get your own Binance Chain address
Open your Binance Chain Wallet and make sure it is set to the correct network. Copy your own Binance Chain address. This is the intermediate destination, not the exchange deposit address yet.

Step 3: Send each asset from BEP20 to your own BEP2 address
For each asset you want to move, such as BNB, pegged Bitcoin, or pegged Ethereum:
- Select the asset in Binance Chain Wallet.
- Paste your own Binance Chain address.
- Confirm that this is a cross-chain transfer from Binance Smart Chain to Binance Chain.
- Send the amount you want to move.
At this stage, you are moving funds between addresses you control. That is much safer than sending directly to an exchange on a network or format that may not be supported.
Step 4: Get the correct Binance.US deposit address and memo
Once your assets are in your BEP2 wallet, go to Binance.US and open the deposit page for each asset. Select BEP2 as the network. You should see:
- A deposit address
- A memo field
Copy both carefully. It helps to paste them into a plain text editor first so you can compare them before sending. Do not skip the memo. If the deposit requires it and you omit it, your funds may not arrive correctly.

For BTC on BEP2, Binance.US will specifically warn that both MEMO and Address are required for deposits. That warning is not optional. Treat it as a hard requirement.

Step 5: Send from your BEP2 wallet to Binance.US
Now switch your Binance Chain Wallet to the Binance Chain network. For each asset:
- Select the asset.
- Paste the Binance.US BEP2 deposit address.
- Enter or paste the required memo.
- Confirm the transaction.
- If you are using a hardware wallet, approve it on the device as usual.
After sending, check your Binance.US deposit history to confirm the deposits are arriving. In the video, BNB, BTC, and ETH all show up in the recent deposit history after this process.

Important warning: direct cross-chain sends may not include a memo
This is the part I cannot stress enough. If you try to send directly from Binance Smart Chain to an exchange deposit address that expects BEP2 with a memo, you can lose funds because the required memo may not be attached properly.
That is why the safer flow is:
- BEP20 wallet → your own BEP2 wallet
- Your own BEP2 wallet → exchange BEP2 deposit address + memo
Do not shortcut step one just to save time. A small test amount can also help if you are new to this process, but even with a test amount, make sure the network and memo requirements match exactly.

Alternative: use SafePal to move pegged tokens back to native chains
If you cannot use Binance.com or Binance Bridge, another option is the SafePal app. I want to be clear about one thing from the video: the SafePal hardware wallet itself may not be something everyone would choose, but the SafePal app can still be useful as a software wallet for moving funds between chains.
This method is especially relevant if you have Binance Smart Chain pegged tokens and want to move them back onto their native networks without relying on geo-blocked Binance services.
Step 1: Install and set up SafePal as a software wallet
Install the SafePal app from your device’s app store, then open it and choose to use it as a software wallet. You will need to set a password before doing anything else.
You can either create a new wallet or import an existing mnemonic phrase from another software wallet such as MetaMask. If you import an existing seed, the app may detect assets already on that account in supported networks.

Step 2: Move BEP20 tokens into SafePal if needed
If your assets are already in SafePal, you can move to the next step. If they are in another Binance Smart Chain wallet, send them to your SafePal address first. As before, this is an intermediate step using a wallet you control.
Step 3: Swap pegged tokens back to native chains
Inside SafePal, use the swap feature to convert a pegged token into its native-chain version where supported. In the video, the example shown was moving BEP20 ETH back to real Ethereum on the Ethereum network.
The process is straightforward in concept:
- Select the asset you want to move or convert.
- Choose the swap option for the target chain.
- Review the details carefully.
- Confirm with your password if prompted.
- Wait for the transfer status to update.

These transfers are not always instant. You do not need to keep the app open while they process, but you can check status later from the swap history area. In the video, the transfer completes and the resulting ETH appears in a normal Ethereum wallet, shown in Ledger Live.

What to do if something fails during the cross-chain swap
In the video, one attempted cross-chain transfer for Bitcoin failed while it was being recorded. The presenter notes that this can happen with certain token swaps between Binance Chain and Binance Smart Chain at times. If you see a “failed to send transaction” message:
- Do not assume your funds are gone immediately, but do check carefully.
- Confirm which wallet actually holds the assets after the attempt.
- Try again later if the issue appears to be temporary.
- Use an alternative route such as SafePal if the direct method keeps failing.
- If you cannot figure out where your funds are, stop and get help before sending more.

A failed message is stressful, but panicking usually makes things worse. The safest next step is to verify balances in the source wallet, destination wallet, and any intermediate wallet you used. Only then decide whether to retry or use a different path.
Practical safety checklist before sending
Before you move anything meaningful, check all of these:
- I know exactly which chain my asset is on now.
- I know exactly which chain the receiving address expects.
- If a memo/tag is required, I have it copied correctly.
- I am not sending directly from BEP20 to an exchange if the deposit requires BEP2 plus memo.
- I am using my own intermediate wallet where needed.
- I can identify the correct network in my wallet before confirming.
- I understand that a failed transaction may require support or a different route.
If any one of those answers is “no,” do not send yet.
Final thoughts
The Binance ecosystem has several overlapping chains, and the naming makes it easy to make an expensive mistake. BEP20, BEP2, and ERC20 are not interchangeable just because they may show the same asset name. Pegged tokens are IOUs on other networks, not the native asset itself.
If you need to move funds from Binance Smart Chain to Binance.US or back onto a native chain without using Binance.com or Binance Bridge, the two main options covered here are:
- Use Binance Chain Wallet to move assets from BEP20 to your own BEP2 address, then deposit with the correct address and memo.
- Use SafePal as an intermediary software wallet to swap pegged tokens back to native chains where supported.
For new users, my honest advice is still: if you can avoid complicated multi-chain wallets at first, do so. The more networks involved, the higher the chance of a mistake. But if you already have funds stuck in this ecosystem, understanding these differences and using an intermediate wallet can help you move them safely.
If you get completely stuck or are worried that funds may be lost, my site has information on recovery services and consultations. The best recovery strategy is always to stop, verify what happened, and avoid sending more until you understand the exact chain and destination requirements.
Questions from viewers
Common questions from the comments on this video, with my answers.
I have funds on Binance Smart Chain (BEP20) but no BNB to pay for gas fees. How do I get BNB there without using binance.com?
You can buy BNB on the BEP2 chain via Bitcoin.com, which works in many US states where Binance.US is unavailable. Once you have it on BEP2, use the Binance Chain Wallet extension to move it cross-chain to the Binance Smart Chain (BEP20). Note that there is no automatic cross-chain transfer; you must manually move funds between the two chains using the wallet. (Apps and tools change, so check the current version if something looks different.)
I sent tokens to an exchange or custodial wallet on the wrong network (e.g., BEP20 instead of ERC20). Can I recover them?
Unfortunately, if you sent funds to a custodial wallet or exchange that does not support the specific token and network combination you used, your only option is to contact their support team and hope they can help. If they cannot recover it, the funds are effectively lost. Anyone else claiming they can recover these funds is likely a scammer.
How do I convert pegged tokens (like BEP20 ETH or BUSD) back to native chains (ERC20) or other exchanges if I can't use Binance?
If you cannot use Binance.com or Binance.US, you can try using the SafePal app to swap pegged tokens back to native chains. Alternatively, you might be able to use Bitcoin.com exchange for BEP2 assets. For some tokens, you may need to first swap them for a supported asset like BNB or USDT on a DEX like PancakeSwap before moving them cross-chain. Always verify that the destination exchange supports the specific token and network you are sending from. (Apps and tools change, so check the current version if something looks different.)
My funds are visible on a block explorer (like BSCScan) but not in my wallet app (like Trust Wallet or MetaMask). What should I do?
This usually happens because the token or network isn't enabled in your wallet. In Trust Wallet, go to the coins menu and enable the specific token on the correct chain (e.g., BEP20). In MetaMask, ensure you have added the Binance Smart Chain network and imported the custom token contract address if it's not listed by default. If you still can't see them, check that you are looking at the right chain address.
Can I send BEP20 tokens directly to Coinbase or other major exchanges?
No. Coinbase does not support BEP20 at all, so sending funds via this network will result in total loss. You must either cash out via an exchange that supports BEP20 (like Binance global) or swap the tokens to the Ethereum chain (ERC20) first before sending them to exchanges that only support standard Ethereum networks.
Why did my transaction fail with an error about 'not enough BNB' or 'miners' fee' when trying to swap or send?
You need to hold BNB on the specific network you are transacting on to pay for gas fees. Even if you are swapping one token for another, the transaction itself requires BNB on that chain to process. You only need a small amount (a few dollars worth) to cover the fee. Ensure your wallet is funded with BNB on the correct network (BEP20 for Smart Chain, BEP2 for Binance Chain) before attempting the transaction.
Stuck with a wallet recovery?
I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.
Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







