In this article, I’ll walk through the Foundation Passport Bitcoin hardware wallet in a way you can follow even if you never watch the video. It is aimed at beginners who want an air-gapped wallet that is easy to set up, and also more experienced users who care about backups, third-party wallets, open source code, and advanced features.
If you prefer watching, Watch the video. I bought this device myself; there were no freebies involved in making it.
One important note before we start: the Foundation Passport has some history. It began as a fork of the older Coldcard software base and added new functionality, a new interface, and its own direction. That process caused drama, which ultimately led CoinKite to change the Coldcard license away from being open source. The Foundation Passport remains open source, so it is worth knowing that context when you read reviews or comments online.
Unboxing and physical overview
The Passport arrived in a sealed box with a numbered security seal on the corner. That is a good thing for supply-chain trust: if the seal is broken before you receive it, do not use the device.

Here is what came in the box:
- The Foundation Passport device
- A recovery seed sheet / backup card
- A getting-started guide with a QR code and web address
- Stickers
- A USB-C cable
- An industrial-grade MicroSD card
- Two USB-to-MicroSD adapters, one for USB-C ports and one for iPhone

The Passport has a “feature phone” style look. It has a numeric keypad, navigation buttons, a color screen, a camera on the back, and a removable battery for long-term storage. The MicroSD slot is on the top of the device, and the USB-C port at the bottom is for charging only. That last point matters when you try to connect it to third-party software later.
Initial setup with Envoy
For most people, I would start with the default guided setup using Foundation’s companion app, Envoy. You can scan the QR code from the Passport into your phone, which takes you to the download page for Envoy.
Once Envoy is installed, you choose to manage a Passport. The app asks whether you want to connect through Tor or directly. This is a privacy choice about how your use of the Envoy app appears to your ISP and network operator. In my demo, I chose better performance because that was not the main privacy concern in this setup.
The next step is device authentication. You scan a QR code from the Passport into Envoy, then scan verification QR codes back onto the device. This confirms that the device is genuine. It passed the security check in my test.

Important: the PIN is not recoverable
Before you set your PIN, understand this clearly: if you forget the Passport PIN, there is no way to recover it or reset the device. This is similar to Coldcard behavior. It is different from many other hardware wallets where a factory reset may still let you restore access using your seed.
So write your PIN down somewhere safe before you continue. If you are worried about getting locked out later, consider getting advice on backups and recovery strategy before you finish setup: recovery services consultations.
Firmware update via MicroSD
After the security check, Envoy asks whether you want to update the Passport firmware. The process uses the bundled MicroSD card.
- Download the firmware file through Envoy onto the MicroSD card using one of the included adapters.
- Remove the card from your phone or computer.
- Insert it into the Passport.
- On the device, go to the firmware option and select the downloaded firmware file.
- Confirm the update.
The device verifies and installs the firmware. This is a useful part of first-time setup because you want to start with current, verified software before creating your seed.
Seed creation and encrypted backup
Once the firmware is updated, you can create or restore a wallet seed. For a new wallet, choose to create a new seed.
The Passport generates a 24-word BIP39 seed. You need to write that down on the recovery card. The device also asks for a backup code. This backup code is required to access the encrypted MicroSD backup.

The setup then creates an encrypted 7-Zip backup on the MicroSD card. This is a strong digital backup, but it only helps if you also have the backup code. Treat the seed sheet, backup code, and encrypted backup as separate pieces of your overall recovery plan.
Do not photograph or store these in insecure places. Anyone who gets both your seed and passphrase can access your funds. If you use a BIP39 passphrase later, include that information safely in your backups too.
Receiving and sending with Envoy
After setup, I connected the Passport to Envoy by scanning the connection QR code. The app then suggested validating a receive address. This is a good habit: verify that the address shown in the software matches what the device expects for the seed on that device.
Envoy can be used for receiving and sending Bitcoin with guided prompts. You can choose fee levels, review transaction details, sign with the Passport using QR code, then broadcast the signed transaction from your phone.

One behavior worth knowing: Envoy may increment receive addresses even before earlier ones have been used. In my demo, the address I received on in Envoy appeared later as a higher address index when I looked at the same account in Sparrow. That is not necessarily a problem by itself, but it can matter if you use multiple wallet apps with the same device.
If another wallet does not show all transactions you expect, look for a setting called gap limit and increase it to something like 50. That should normally allow the other wallet to scan enough addresses to find the activity generated by Envoy.
BIP39 passphrase and account naming
The Passport supports multiple accounts and BIP39 passphrases. These are powerful features, but they can also be dangerous if you do not understand them.
A normal account index gives you a separate set of addresses derived from your seed. A BIP39 passphrase creates an entirely different wallet hierarchy. If you use one, you need both the 24-word seed and the correct passphrase to access those funds. Forgetting either one means losing access to that particular set of accounts.
When I applied a passphrase in the demo, the device showed a small shield icon so it was obvious that passphrase mode was active. That is helpful because it removes ambiguity about which account you are looking at.
Account names and multiple account indexes are stored on the device itself. If you create or edit accounts with a MicroSD card inserted, those details can also be saved into the encrypted backup. This makes it easier to keep track of your accounts on the device rather than only in wallet software.
Anti-phishing words and advanced settings
The Passport includes anti-phishing security words, similar to Coldcard. When enabled, the device shows two random words during boot after you start entering your PIN. If those words are not what you expect, stop. That could mean someone has tampered with or swapped the device before you entered your full PIN.
This does not make the device impossible to attack, but it is a useful layer of security against simple fake-device phishing.
Other advanced options include:
- Viewing seed words
- Exporting wallet summary files
- Formatting and listing MicroSD cards
- Calculating SHA256 sums for files on the card
- Stateful multisig support
- CASA, PostMix, and Key Manager extensions
- BIP85 key derivation
- Backup, restore, verify backup, and wipe options
The SHA256 check is especially useful. You can calculate the hash of a firmware file or other file on the MicroSD card and compare it against the expected value from Foundation’s official source. That helps you confirm that what you are installing or using is what you expect.
Pairing with Sparrow Wallet
Even though Envoy works well, many users will want to use third-party wallet software. I paired the Passport with Sparrow as an air-gapped hardware wallet.
Because the USB-C port on the Passport is charging-only, it does not connect over USB like some other hardware wallets. Instead, you can pair using QR codes or by importing/exporting files through MicroSD.
In Sparrow:
- Create a new wallet.
- Choose an air-gapped hardware wallet.
- Select Passport from the device options.
- For single-sig, choose QR code connection.
- On the Passport, go to connect wallet and select Sparrow.
- Scan the receive address in Sparrow to verify the connection.

This worked well for verifying that the same account was connected correctly. After pairing, I could see the earlier activity in Sparrow once it had scanned enough addresses.
Signing via MicroSD PSBT
The Passport can also sign transactions using files on a MicroSD card instead of QR codes. This is useful if you prefer an offline file workflow or want to review raw transaction data before broadcasting.
In my Sparrow demo:
- Create a send transaction in Sparrow.
- Finalize it for signing.
- Save the PSBT file to a MicroSD card from your computer.
- Insert the card into the Passport.
- Choose sign with MicroSD on the device.
- Select the
.psbtfile and review the transaction details. - Sign it.
The Passport writes output files back to the card. In my test, it produced both a signed PSBT file that could be loaded into Sparrow and a raw .txn file containing the broadcastable Bitcoin transaction hex.
You can then load the signed PSBT into Sparrow and broadcast it from there. Alternatively, you can open the raw transaction in a text editor, copy the hex, paste it into a block explorer tool such as BlockCypher, review the decoded inputs and outputs, and broadcast it once you are satisfied. This gives you an extra manual review step before the transaction goes out.
Restore from backup, documentation, and open source
I also tested restoring from an encrypted MicroSD backup after wiping the device. Using the backup code, I restored the most recent backup, and my accounts and settings came back.
The documentation is good. It covers setup, backups, wallet compatibility, Envoy usage, and even how to decrypt digital backups using a 7-Zip file manager if you have the correct backup code. You should not do that on an internet-connected computer during normal operation unless you understand the risks, but it is useful to know the format is inspectable with standard tools when needed.
Another important point: the Foundation Passport is fully open source under an MIT license for both software and hardware design. On Foundation’s GitHub organization, you can see firmware source code and hardware design files. The firmware repository also includes information about reproducible builds, which matters if you want to verify that the distributed firmware matches the public source.

This is a meaningful difference from the older Coldcard situation after the licensing change. The Passport being properly open source means developers can inspect, reproduce, build on top of, and contribute to the stack. That matters for long-term trust in a Bitcoin security device.
Final thoughts
The Foundation Passport is best described as a user-friendly version of the Coldcard experience. It keeps many advanced features while making the setup process more guided and approachable through Envoy, clear prompts, QR code workflows, encrypted backups, anti-phishing words, multisig support, BIP85 derivation, and third-party wallet compatibility.
For beginners, the main strengths are:
- Guided setup with Envoy
- Clear on-device warnings about PIN loss
- Encrypted MicroSD backups
- Easy receive/send flow
- Air-gapped operation
- Good documentation
- Open source software and hardware
For more advanced users, it still supports:
- Multiple accounts
- BIP39 passphrases
- Stateful multisig
- Custom account names stored on the device
- MicroSD PSBT workflows
- SHA256 file verification
- CASA, PostMix, and Key Manager extensions
- Sparrow and other third-party wallet use
The buttons can feel a little fiddly at times, but that did not stop me from using the device. The color screen is readable, the QR codes are large enough to scan easily, and the overall experience feels designed to reduce mistakes rather than just expose raw functionality.
If you want an air-gapped Bitcoin hardware wallet that is beginner-friendly without abandoning advanced security features, the Foundation Passport is worth serious consideration. Just be clear about your backup plan before you finish setup: the seed, PIN, backup code, and any BIP39 passphrase all matter. Get those right first, because they determine whether you can recover access later or not.
Choosing a hardware wallet?
See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.
Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







