Jade Plus Bitcoin Hardware Wallet: Unboxing, Setup, Review

In this article, I’ll walk through an unboxing, setup, and practical review of the Blockstream Jade Plus Bitcoin hardware wallet. The original Jade has been a fantastic device for a couple of years now, and the Jade Plus is basically a more premium version with several quality-of-life improvements added along the way.

I bought all the hardware in this walkthrough with my own money, so there are no freebies involved. If you want to see the full visual demo, Watch the video. I’ve also included a few screenshots below to make it easier to follow each step.

What’s in the Box?

The Jade Plus arrives in a compact retail box. In my case, I got the silver version, and I also picked up a Jade Link Air Gap Drive because I wanted to demo all of the official hardware before moving on to DIY options later.

Here is what you get inside:

  • Setup guide
  • Information sheet
  • Standard written recovery sheets
  • Compact Seed QR cards for 12-word and 24-word seeds
  • Stickers
  • USB-A to USB-C cable
  • Lanyard
  • The Jade Plus device itself

The physical layout of the device is straightforward:

  • A button on the front
  • Two buttons on top
  • Power button on the bottom
  • Camera on the back
  • USB-C socket
  • Lanyard attachment point
Jade Plus unboxing contents
Unboxed Jade Plus with setup guide, recovery sheets, Seed QR cards, cable, lanyard, and device

How the Jade Plus Compares to the Original Jade

The first thing you notice is the screen. The Jade Plus has a much larger display than the original Jade — roughly three times the usable screen area. That makes a big difference when reading addresses, confirming transactions, or navigating menus.

Other visible differences include:

  • Two top buttons instead of the original rocker switch
  • A thinner body
  • Easier-to-open casing on the original compared with the newer design

But the more important changes are under the hood. The Jade Plus uses an ESP32-S3 microcontroller, which brings several practical benefits:

  • Better QR code scanning thanks to improved camera and processing capability
  • USB storage support for things like PSBT signing over a memory stick
  • Improved hardware attestation compared with the original Jade

One important point: both devices run the same core firmware experience. The user interface and most features work the way you would expect from a Jade, with the main extra being the ability to use USB-based air-gap workflows on the Jade Plus.

Original Jade vs Jade Plus size comparison
Side-by-side physical comparison of original Jade and Jade Plus

Initial Setup: Creating a New Wallet

I followed the instructions in the box as if I were completely new to the device.

1) Power on the device

Turn on the Jade Plus using the power button. You’ll land on the startup screen.

2) Select “Setup Jade”

Use the two top buttons to move through the menu and the front button to select an option. Choose Setup Jade.

3) Start a new wallet

Follow the on-device prompts and choose to create a new wallet. The device will generate your recovery phrase.

4) Back up your seed properly

Write down your recovery phrase securely and offline. The setup process asks you to confirm specific words from the phrase as a sanity check. This is not a full verification of every word, so do not skip writing the entire phrase down correctly.

This step is critical. If you lose access to your device and do not have a proper backup, you can lose your funds. Treat the recovery sheet like cash — or more accurately, like the only key to your Bitcoin.

Pairing with Blockstream Green over Bluetooth

For the simplest possible experience, I paired the Jade Plus with the official Blockstream Green wallet app over Bluetooth.

1) Install and open Blockstream Green

Start the app on your phone and choose that you have a hardware wallet to connect. Select Jade.

2) Enable Bluetooth on the device

On the Jade Plus, go into the connection options and select Bluetooth. You will need to grant Bluetooth permissions when prompted.

3) Pair the devices

The app will show the available Jade device. Select it, then confirm that the pairing number matches on both the phone and the hardware wallet before approving the pair request.

Green app and Jade connection selection
Blockstream Green welcome screen next to Jade Plus connection menu

Genuine Check, PIN Setup, and Account Creation

Once paired, one of the first things you can do is run a genuine check. This is useful because it helps confirm that your device is authentic Blockstream hardware rather than something suspicious or counterfeit.

After that, I set up a device PIN. In the video, I used a simple placeholder PIN purely for demonstration purposes — in real life, choose something stronger and store it securely if you need to remember it offline.

Once initialization completes, the seed is saved on the device and the app begins refreshing your accounts. From there, creating a standard Bitcoin account takes just a couple of taps.

Receiving and Sending Bitcoin with Green

This is where the hardware wallet really earns its keep: address verification happens on the device itself.

1) Generate an address in Green

Open Receive in Blockstream Green. You’ll see a QR code and address on your phone, but do not blindly trust what the app shows you.

2) Verify the address on the Jade Plus

Tap Verify on Device. The same address should appear on the hardware wallet screen. Compare it carefully with the one shown in the app. This protects you against a compromised or malicious software interface trying to redirect funds.

Receive screen and on-device verification
Green receive QR next to Jade Plus showing verify-on-device workflow

3) Send Bitcoin back

To send, open Send in Green, scan the destination address, enter an amount (or use “send all”), review the fees, and slide to confirm. The transaction details appear on the Jade Plus for final confirmation before signing.

I also confirmed that it is possible to move unconfirmed transactions, which can be useful if you are doing quick back-and-forth testing or consolidating funds.

Useful Device Options: xpub Export, BIP85, and Settings

Even in the default setup, the Jade Plus exposes a lot of power-user functionality without forcing beginners into complexity.

From Options, you can access features such as:

  • Wallet
  • Export your extended public key (xpub) over QR
  • Change address type or index for compatible wallets
  • Registered wallets
  • Manage multi-sig wallet registrations on the device
  • BIP85
  • Derive additional 12-word or 24-word seeds from your main recovery seed, which is handy if you want separate wallets without carrying multiple independent seeds
  • Device settings
  • Adjust timeout, Bluetooth, display brightness, and other preferences
  • Factory reset when needed
  • Authentication
  • Manage PIN-related options
  • Add OTP support so the device can function like a TOTP authenticator in some workflows

This is one of the things I really appreciate about Jade: it stays simple by default, but advanced users are not locked out.

Air-Gapped Use with Sparrow Wallet

Next, I moved to a more advanced setup using Sparrow Wallet on desktop. Instead of just connecting over USB for convenience, I wanted to test QR-based workflows and USB-based PSBT signing — two areas where the Jade Plus shines.

1) Unlocking the device for air-gapped use

If you want to operate fully air-gapped, you first need to unlock the device with your PIN. This process is a little more involved than a normal USB pairing because Jade uses a blind oracle / PIN server flow to help protect data on-device without relying on a traditional secure element design.

In practice, that means an extra QR exchange step if you are staying offline. I performed this part using a phone for clarity, but the same concept applies when doing it fully air-gapped with another offline screen.

The steps look like this:

  1. Open QR mode on the Jade Plus
  2. Select QR PIN unlock
  3. Scan the provided website QR from your offline device’s camera (or open it on a separate machine)
  4. Enter your PIN in the web interface
  5. Complete the back-and-forth QR exchange until the device is unlocked
Jade QR PIN unlock web flow
Safari showing Jade QR PIN unlock oracle communication page

2) Importing the wallet into Sparrow

In Sparrow:

  1. Create a new wallet
  2. Choose an air-gapped hardware wallet
  3. Select Jade
  4. Scan the xpub from the device

On the Jade Plus side, go to Options → Wallet → Export Xpub, then scan that QR into Sparrow. The import is clean and straightforward once you have the right mode selected.

3) Receiving funds air-gapped

To receive:

  1. Generate an address in Sparrow’s Receive tab
  2. Scan that QR with the Jade Plus camera
  3. Confirm/verify the address on-device

This keeps the core security property intact: you are not trusting the host software alone to show you the correct destination.

Signing PSBT Files over USB Storage

One of the biggest practical upgrades in the Jade Plus is signing transactions via USB storage. This is especially useful for larger transactions that would be awkward or slow to move around using QR codes alone.

1) Prepare a compatible USB stick

You can use the official Jade Link drive, but there is nothing magical about it: it is just a properly formatted USB-C memory stick in a solid case. I also tested a cheap USB-C to microSD adapter with a small card and got the same result.

The key requirement is that the storage be formatted in a way the device understands. If you want maximum reliability, use the official Jade Link. If you are comfortable troubleshooting compatibility, a standard USB stick or micro-SD reader can work too.

2) Export an unsigned PSBT from Sparrow

In Sparrow:

  1. Create your transaction
  2. Finalize it for signing
  3. Save the unsigned .psbt file to the connected USB drive

I named mine tip.psbt in the demo, but any sensible filename works as long as you can find it later.

3) Sign on the Jade Plus

  1. Plug the USB stick into the Jade Plus
  2. Go to Options → USB Storage
  3. Choose Sign
  4. Select the unsigned PSBT file
  5. Review the transaction details on-device
  6. Confirm and sign
Sparrow transaction window with Jade Plus signing via USB
Sparrow PSBT workflow next to Jade Plus with USB storage plugged in

4) Load and broadcast the signed file

Back in Sparrow:

  1. Load the signed transaction from the USB drive
  2. Broadcast it

That completes a fully air-gapped-style signing flow without needing the device to stay connected to an internet-facing machine during the sensitive parts of the process.

DIY Option: Flashing Jade Firmware onto a T-Display S3 Pro Camera

The final part of the review was comparing the retail Jade Plus with a Lilygo T-Display S3 Pro Camera running Jade DIY firmware. This is relevant if you want to build your own device, reduce trust in preassembled hardware, or simply experiment.

1) Use the Jade DIY web flasher

Open the Jade DIY flashing tool in a browser and select Lilygo T-Display S3 Pro Camera as the target model.

2) Connect via JTAG/serial

Attach the device using the appropriate serial/JTAG connection and start the flash process.

Jade DIY web flasher with T-Display option
Browser showing Jade DIY flasher model selection next to physical devices

3) Check what works — and what does not

After flashing, the device can run a recognizable Jade interface and has much of the hardware you want: camera, USB-C, microSD slot, and enough processing capability for many offline workflows.

However, at the time of this review it is not fully on par with the retail Jade Plus in every respect. Notable limitations include:

  • No genuine check (because it is DIY)
  • Battery meter behavior that may not work correctly yet
  • USB storage / microSD signing support that was not fully reliable in my test due to device state detection issues

So if you want a turnkey, retail-supported experience with all features working as expected, the official Jade Plus is the safer choice. If you enjoy building and verifying your own hardware stack, the DIY route is still very attractive — just be clear about what you are giving up in convenience and support.

My Take: Who Is the Jade Plus For?

The message inside the box was a good summary: simple enough for beginners, but advanced enough for cypherpunks. I think that holds true here.

For everyday users, the default experience with Blockstream Green is easy: pair over Bluetooth, verify addresses on-device, and sign transactions with confidence. You get a clean mobile workflow without needing to understand PSBTs or air-gapping concepts right away.

For more advanced users, the Jade Plus adds meaningful upgrades:

  • A much larger screen for safer verification
  • Better QR scanning
  • USB storage support for PSBT signing
  • Improved hardware attestation
  • Stronger open-source and self-hosting options, including deterministic builds and running your own blind PIN server if you want to reduce reliance on provided infrastructure

It costs more than the original Jade, but it remains competitive in the broader hardware wallet market. And if you are extremely price-sensitive or trust-minimization-focused, DIY is still a viable path — with the caveat that some retail features may not be fully equivalent yet.

Bottom Line

If you want a Bitcoin-only hardware wallet that balances simplicity with serious security controls, the Jade Plus is worth considering. It keeps the strengths of the original Jade while fixing several pain points, especially around screen size and QR usability. The USB-based PSBT signing workflow is a real quality-of-life improvement for air-gapped users, and Blockstream’s continued commitment to open source remains one of its biggest long-term advantages.

If you are already using a Jade and happy with it, the upgrade is not urgent unless those extra features matter to your setup. If you are buying new hardware today and want a straightforward but capable option for self-custody, the Jade Plus is a strong choice.

Choosing a hardware wallet?

See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.

Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides