BitBox02 Nova Hardware Wallet Review (Unboxing, Setup, Demo)

The BitBox02 Nova is the latest hardware wallet from Shift Crypto, and it keeps most of what made the original BitBox02 good while adding one big change: iOS support. If you use an iPhone or iPad, this matters because the older BitBox02 did not work with Apple devices in the same way.

In this written version, I’ll walk through the unboxing, setup on an iPhone, firmware install, PIN creation, backup workflow, Bitcoin receive/send behaviour, BIP39 passphrase use, Sparrow integration, Rabby Ethereum blind signing, and how to decode a BitBox02 microSD backup into a 24-word seed using SeedSigner.

Full disclosure: this device was sent to me free of charge by Shift Crypto, but they have not seen anything I publish before release. If you want the visual version, Watch the video.

Unboxing and what’s in the box

The BitBox02 Nova comes packaged simply. You get the device itself, a USB-C extension cable, a microSD card, stickers, compliance/legal paperwork, and a getting-started guide.

BitBox02 Nova unboxing layout
Overhead view of the BitBox02 Nova box contents

The physical design is clean. One end has an integrated USB-C plug, the other side has a microSD slot, and there are capacitive buttons rather than physical clicking buttons on the sides. There is also a small lanyard hole. The front has the screen.

BitBox02 Nova back side
Back of the BitBox02 Nova showing USB-C plug and lanyard hole

The getting-started card is straightforward, but I want to focus on the new Apple support because that is the main reason many people will care about this update.

iPhone setup and Bluetooth pairing

Because the BitBox02 Nova now supports iOS devices, I ran the whole setup using an iPhone. This would not have worked with the previous BitBox02 in the same way.

1. Install the BitBox app

First, install the BitBox app on your iPhone or iPad. In the App Store, search for “BitBoxApp” and allow it to discover devices when prompted.

Searching for BitBoxApp on iPhone
iPhone showing App Store search for BitBoxApp

2. Insert the microSD card and connect the device

The setup flow expects the included microSD card to be inserted into the device during initial backup creation. Then you connect the BitBox02 Nova to your phone or computer.

In my case, I was using an older iPhone with a Lightning connector rather than USB-C, so I needed a USB-C female to Lightning male adapter cable. This is not elegant, but it worked because the cable was mainly providing power while the device handled pairing and setup over Bluetooth.

USB-C to Lightning workaround
iPhone connected to BitBox02 Nova via USB-C-to-Lightning adapter

If your iPhone already has USB-C, this step is simpler. If you are using an older Lightning iPhone, expect a slightly janky physical setup, but the device should still be usable.

3. Pair over Bluetooth

Once the app detects the device, select it and confirm that the pairing details match on both the phone and the BitBox02 screen. This is important because you want to make sure you are connecting to your own wallet, not some other nearby device.

Bluetooth pairing confirmation
iPhone and BitBox02 showing matching Bluetooth pairing details

Firmware install, wallet creation, and PIN setup

After pairing, the app prompts you to install firmware. Accept the prompt and let the device restart after updating.

Firmware installation in progress
BitBox app installing firmware on BitBox02 Nova

Next, create a wallet. You can give it a name, then confirm that name on the device. After that, you set a PIN/password using the capacitive buttons. The top row of buttons is used to select digits, and the bottom row confirms your selection.

PIN entry screen
BitBox app prompting for BitBox password while device shows PIN interface

For testing, I used a simple PIN. For real use, you should choose something stronger that you can remember reliably under pressure. This is not the same as your recovery seed, but it still matters because it protects local access to the unlocked wallet session.

Default microSD backup: an important warning

Once setup continues, the BitBox02 Nova creates a default backup on the included microSD card. The app asks you to remove the card and store it securely.

Create backup screen
BitBox app showing create backup warnings

This is where I want to be very clear: the default backup is an unencrypted microSD card. There is no password protection on that backup in the way you would expect from a paper or metal seed backup. Do not plug it into random computers, do not leave it next to your device, and do not treat it like a “safe enough” backup for long-term storage without thinking carefully about where it lives.

A microSD card is convenient, but it is also easy to lose, physically vulnerable, and less durable over decades than paper or metal. If you are storing meaningful amounts of Bitcoin or other assets for the long term, I strongly recommend creating a proper seed-based backup as well. The BitBox02 Nova does let you display your 24-word recovery phrase in settings, so this is not impossible. It just requires you to know to do it and follow the on-screen warnings carefully.

Bitcoin receive address behaviour

The Bitcoin workflow in the BitBox app is clean. When you go to receive, you can verify the address on the device before accepting funds from someone else. This is a good security feature because it helps prevent address-substitution mistakes.

Receive screen with Verify address button
iPhone showing receive address and verify-on-device option

The QR code appears when the address is displayed on the device at the same time. That forces you to actually check the hardware wallet, which I like.

One behaviour worth knowing: by default, the BitBox02 does not automatically move to a new Bitcoin receive address after each confirmation. It keeps reusing the same address unless you manually choose another one. You can select different addresses and script types in the app, but if privacy matters to you, understand that the default flow is not the same as some wallets that automatically increment to a fresh address for every incoming transaction.

Sending Bitcoin from the iPhone app

Sending is straightforward. Open your account, tap send, enter the amount and destination, then review the transaction details on the phone before confirming on the device.

Send transaction screen
iPhone showing send transaction screen with BitBox02 connected

On the device, you can verify the address and fee information before holding to confirm. The pending transaction appears in the app quickly once broadcast. This is a good balance of simplicity and security for day-to-day use.

Accessing your 24-word recovery phrase

Even though the default backup is microSD-based, the BitBox02 Nova still gives you access to your BIP39 recovery words through settings. If you want a paper or metal backup, this is where you would go.

Manage device menu
BitBox app showing manage device options

The app walks you through warnings before displaying the words. You should never show your recovery phrase to anyone. Write it down in a safe location, or better, stamp it into metal if this is a long-term backup. If you only have a microSD card as your backup, I would not feel comfortable calling that ideal for permanent storage.

BIP39 passphrase demo

The BitBox02 Nova also supports an optional BIP39 passphrase. This is an advanced feature, and the app does a good job explaining why it matters before letting you enable it.

BIP39 passphrase explanation
BitBox app explaining backup considerations for BIP39 passphrase

A BIP39 passphrase is not just another password. It changes which wallet your seed points to. If you make a typo, you get a different but valid wallet. That means if you use one, you need to back it up properly and test the workflow before relying on it.

Entering passphrase on device
Passphrase entry on BitBox02 touchscreen keyboard

In my demo, enabling the passphrase took me to a completely separate set of accounts with no balance and no transactions from the wallet I had just used. Leaving the passphrase blank returns you to the original wallet. This is exactly how BIP39 passphrases should behave: they are powerful, but easy to misuse if you do not understand them.

If you use a passphrase, write it down. Do not rely on memory alone. Accidents happen, and a forgotten or mistyped passphrase can make funds appear lost even when the seed is intact. If you ever need help with recovery-related issues, my wallet recovery services page covers that kind of work.

Using BitBox02 Nova with Sparrow

One reason I like hardware wallets is that they should not lock you into one vendor’s software. The BitBox02 has always worked well with third-party Bitcoin tools, and the Nova continues that strength.

I tested it with Sparrow Wallet. After creating a new wallet in Sparrow, I connected the BitBox02 over USB and imported the keystore. It paired using a code confirmation, then imported the default native Segwit account.

Sparrow importing BitBox02 keystore
Sparrow showing connected hardware wallet import dialog

The transaction history matched what I had done in the mobile app. When sending from Sparrow, the signing screen on the BitBox showed useful details, including lock time and RBF status. That is helpful information that not all wallets show you before signing.

Sparrow signing with BitBox02
Sparrow signing transaction while BitBox confirms

If you want more control over Bitcoin transactions, Sparrow plus BitBox02 Nova is a solid combination.

Rabby Ethereum and blind signing test

For Ethereum on a desktop browser, I tested the device with Rabby Wallet using BitBoxBridge. After installing the bridge and pairing the device, Rabby could see my Ethereum address and balance.

BitBoxBridge download page
BitBoxBridge page shown while BitBox02 is connected

Normal transfers looked clean. The device showed a straightforward transaction similar to what you would expect for a simple send: destination, amount, and confirmation. That is good.

The less comfortable part is DeFi. When I tried a token swap, the device indicated that it was signing an unknown contract with raw transaction data. In other words, this is blind signing. The warning tells you to proceed only if you know exactly what the data means. In practice, most people do not. You are trusting the wallet software and the interface in front of you.

So yes, you can store and send Ethereum with the BitBox02 Nova through Rabby. But if you plan to use DeFi regularly, understand that smart contract interactions will require blind signing unless the tooling gives you better visibility.

Decoding a BitBox02 microSD backup with SeedSigner

This is one of my favourite parts of the demo because it adds an extra recovery option.

The default BitBox02 backup on the microSD card is stored in binary format inside a folder named bitbox02. If you plug the card into a computer, you can see those files, but they are not human-readable seed words.

BitBox02 microSD backup contents
File Explorer showing bitbox02 folder on SD card

Shift Crypto provides a recovery tool for decoding these backups into a standard 24-word seed. I also added support for BitBox02 backups to my fork of SeedSigner, so you can load the backup directly into SeedSigner and use it like any other loaded seed.

SeedSigner with loaded seed
SeedSigner showing main menu after loading a seed

This is useful for several reasons:

  • It gives you another way to recover access if you cannot get hold of a BitBox02.
  • It lets you use the recovered seed with Sparrow, BlueWallet, or other compatible tools.
  • It helps bridge the gap between the BitBox microSD backup format and standard BIP39 workflows.

If you want a physical air-gapped tool for this kind of work, I have a SeedSigner + Smartcard Kit that covers seed creation, loading, and offline signing workflows.

Open source notes and final review

The BitBox02 Nova continues Shift Crypto’s open-source approach. The firmware repository is public, but at the time of recording the hardware documentation had not been fully updated for all of the new Nova components. The device uses an updated secure element compared with the original BitBox02, specifically one similar to what you would find in a Trezor Safe series device.

BitBox02 firmware repository
GitHub repository page for bitbox02-firmware

Overall, I think the BitBox02 Nova is a competent and easy-to-use hardware wallet. It keeps the strengths of the original BitBox02: simple vendor software, USB connectivity, Bluetooth support on the new model, advanced Bitcoin features, Sparrow compatibility, and open-source firmware. The biggest practical upgrade for most people is iPhone and iPad support.

My main reservation remains the default backup method. An unencrypted microSD card is convenient, but I do not consider it the best long-term backup medium compared with paper or metal seed backups. At least the device still lets you display your 24-word recovery phrase in settings, so you can create a stronger backup if you know to do so.

If you already own an original BitBox02 and are happy using it on desktop, there may not be much reason to upgrade unless you specifically want Apple support or phone-based use. If you are new to the platform and want something straightforward but still capable, the BitBox02 Nova is worth considering — just make sure your backup strategy matches how long you intend to store your funds.

Choosing a hardware wallet?

See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.

Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides