,

BTCRecover Install on MacOS (Python 3), GPU Acceleration & Seed Recovery Demo

I do a lot of wallet recoveries, both through consultations and as trusted recoveries for people who need hands-on help. Even after all that work, I still think the Apple Silicon Mac mini is one of the best options for most people if you want a dedicated machine to run BTCRecover offline. It comes fully assembled, it is quiet, efficient, fast enough for many recovery jobs, and it can just sit in a corner running for days or even weeks when needed.

In this guide, I am walking through an updated version of how to install and use BTCRecover on macOS. The setup process is a little fiddly on Mac, but if you follow the steps carefully, it works well. If you want to see the full walkthrough, Watch the video.

One important note before we start: software installation details can change over time. The BTCRecover documentation is usually easy for maintainers to keep current, so if anything in this article looks different from what you see on your system, follow the written BTCRecover docs.

Why I Use a Dedicated Mac mini for BTCRecover

For long recovery runs, my preference is to use a dedicated machine that does not do anything else. That matters because once you start entering real seed phrases or passphrases, you want as little risk as possible from other software, network traffic, background updates, or unknown processes running on the system.

The Mac mini is attractive for this kind of work because it is simple to buy ready-made, it does not require you to assemble hardware, and it runs macOS with a stable base environment. You can install BTCRecover once, verify that it works with tests and examples, then keep the machine offline when doing real recovery work.

In the video, I am using an M1 Mac mini running a fresh install of macOS Tahoe 26.4. The same general process should apply to other modern Macs, though exact package names or documentation steps may vary slightly depending on your system and what is current at the time you read this.

Fresh macOS Tahoe install on an Apple Silicon Mac mini
About This Mac showing an M1 Mac mini running macOS Tahoe 26.4

Start With a Fresh macOS Install if Possible

If you are doing serious recovery work, I would strongly recommend using a clean system rather than your daily driver. A fresh install reduces the chance that something unexpected is already installed on the machine.

You do not necessarily need a brand-new Mac, but a dedicated device is much safer. Ideally, this should be a machine that stays offline except when you are doing setup or testing. For real recovery work, you want to disconnect it from the network before entering any sensitive wallet material.

The goal of the installation process is simple: get BTCRecover installed correctly, confirm that the Python environment is using Homebrew Python 3 rather than macOS’s older default Python, install the requirements needed for the wallet types you care about, optionally enable GPU acceleration with PyOpenCL, and then verify everything with the test suite.

Download BTCRecover From the Documentation

The first step is to go to the BTCRecover documentation and follow the installation instructions for macOS. In the video, I use the “Installation & Testing” section of the docs.

BTCRecover installation documentation
BTCRecover readthedocs page showing installation steps

From there, download the BTCRecover repository. The documentation links directly to the GitHub source. After it downloads, open your Downloads folder in Finder and locate the extracted btcrecover folder.

A useful macOS trick is to control-click that folder and choose “New Terminal at Folder” or a similar option. This opens a terminal window already inside the BTCRecover directory, which makes the remaining commands easier because you are working from the correct location.

Do Not Rely on macOS’s Default Python 3

This is one of the most important parts of the Mac setup: do not rely on macOS’s default Python 3 if it appears when you type python3.

macOS may offer to install some developer tools and then provide an older system Python. That older version can cause problems with BTCRecover dependencies, especially packages that need a modern Python environment. In the video, I show what happens when you try this path: macOS warns about missing developer tools, but even if it installs something, it may not be the Python version we want for this project.

macOS warning when typing python3 before Homebrew setup
Terminal showing xcode-select warning after typing python3

Instead, install Homebrew first. Homebrew is a package manager for macOS and is used here to get the correct Python 3 version plus other build requirements needed by BTCRecover.

Install Homebrew

Open your terminal in the BTCRecover folder, then copy the Homebrew installation command from the BTCRecover documentation. Paste it into Terminal and press Enter.

You will be asked for your Mac account password. After that, macOS may show a summary of what Homebrew is going to do. Press Enter or Return to continue. The install can take several minutes depending on your machine and network speed.

When the installation finishes, follow the “Next steps” shown in Terminal. These usually involve adding Homebrew to your shell path so future terminal sessions can find it correctly. Copy those commands from the output and run them as instructed by Homebrew.

Homebrew next steps after installation
Terminal showing completed Homebrew install and PATH setup instructions

After that, you should be able to check where Python 3 is coming from using:

which python3

At this stage, it may still point to the older system Python. That is expected before we finish the BTCRecover-specific setup. The next step is to install Homebrew Python and the related build requirements shown in the documentation.

Install Python 3 via Homebrew

Use the Homebrew command from the BTCRecover macOS instructions to install Python 3 and any required build dependencies. In the video, I copy the documented brew command into Terminal and run it.

Once that finishes, check again:

which python3

You want this to point to the Homebrew version of Python 3, for example under /opt/homebrew/bin/python3 on Apple Silicon systems. If it still points to /usr/bin/python3, your terminal may not have picked up the updated environment yet. In that case, close the terminal and open a fresh one, or reload your shell configuration if you know how to do that safely for your setup.

Homebrew Python 3 now in use
Terminal showing which python3 resolving to Homebrew Python

This matters because BTCRecover’s extended requirements can fail or behave badly if the wrong Python is used. The whole point of this step is to make sure you are using a current, properly managed Python installation rather than whatever macOS happened to provide earlier.

Optional: Install Rust for Broader Wallet Support

Depending on the wallet type you are trying to recover, your system may need a working Rust installation. For many common recovery jobs, you may not need it immediately, but if you want BTCRecover to support more exotic or less common wallet types, installing Rust is worth doing.

In the video, I install Rust using the command shown in the documentation and choose the default option when prompted. One quirk I noticed while making this update: after running the Rust installation, my shell briefly pointed back toward the older system Python 3. That was not what we wanted.

The fix is simple: close that terminal window and open a fresh one. Then check again with which python3. In my case, the new terminal correctly showed the Homebrew Python path.

If you are unsure whether you need Rust, I would usually install it if you want maximum compatibility. It gives BTCRecover more options for different wallet formats and recovery methods. If you only care about a very specific common wallet type, check the documentation to see whether your target requires additional dependencies.

Install the Extended Python Requirements

BTCRecover can be installed with essential requirements or extended/full requirements. The essential set is enough for some basic recoveries. The extended set gives you broader support across more wallet types that BTCRecover supports.

In this guide, I install the extended wallet support because it makes the system ready for a wider range of recovery jobs.

On macOS, there are two important details:

  1. You need to export the Homebrew Python path before installing some packages, otherwise the Wally Core build may fail.
  2. You also need to add --break-system-packages to the pip install command if your environment requires it, otherwise pip may refuse to proceed and throw an error.

In Terminal, set the Python variable as shown in the documentation:

export PYTHON=/opt/homebrew/bin/python3

Then run the extended requirements install command from the BTCRecover docs, adding --break-system-packages where needed. In the video, I use the documented full/extended requirements file and add that flag so the installation completes successfully.

Installing extended Python requirements on macOS
Terminal showing export PYTHON path and pip install with –break-system-packages

This step can take a few minutes because it installs multiple Python packages and builds some components from source. When it finishes, you should have the core BTCRecover environment ready for most wallet types.

Enable GPU Acceleration With PyOpenCL on Apple Silicon

As of the time I made this video, GPU acceleration is available on Apple Silicon using PyOpenCL. This can make a big difference for some wallet recovery types, though your results will vary dramatically depending on the wallet type, CPU strength, and GPU in your Mac.

In my quick testing on an M1 Mac mini, Bitcoin Core-style recoveries showed a very large improvement when moving from CPU to GPU. I saw roughly ten times acceleration for that particular case. However, BIP39 seed recovery did not get the same kind of boost, partly because Apple Silicon CPUs are already fast relative to the integrated GPU in that machine.

So do not expect every wallet type to speed up by the same amount. It is worth testing with and without OpenCL if you are doing a large or time-sensitive job. But for some recovery types, GPU acceleration can be very useful.

To install PyOpenCL on macOS, use pip as shown in the documentation:

pip3 install pyopencl --break-system-packages

This installs PyOpenCL along with supporting libraries needed for OpenCL-based acceleration. Once it completes, BTCRecover can use GPU acceleration where supported.

PyOpenCL installation completing
Terminal showing pip install output for PyOpenCL and dependencies

Run the Test Suite Before Using Real Wallet Material

Before you enter any real seed phrase or passphrase, run BTCRecover’s test suite. This is a critical step because it confirms that your Python environment, dependencies, GPU setup where applicable, and core recovery logic are working correctly.

In the video, I run the documented test command from inside the BTCRecover folder. macOS may ask whether Terminal can access certain folders, such as Downloads or temporary files used by the tests. If you trust this local setup, allow that access so the tests can complete.

You should see a long list of tests running. The important result is that they pass, with only expected skips for things your machine does not support, such as multi-GPU setups. In my run, the suite completed successfully and confirmed that BTCRecover was installed and working.

BTCRecover test suite passing
Terminal showing successful test run output

If tests fail, stop and fix the installation before touching real wallet data. Do not assume a small error is harmless. Recovery tools are only as good as their environment, and a broken dependency can waste hours or produce misleading results.

Basic BTCRecover Usage Examples

Once BTCRecover is installed and tested, using it is much more straightforward. The usage examples in the documentation work across operating systems once your local installation is correct. You can use either the graphical interface or command-line examples depending on what you are comfortable with.

In the video, I run seedrecover.py from inside the BTCRecover folder. This starts the seed recovery tool and shows a security warning banner. It also offers to open a file picker if you have a wallet file, followed by a GUI dialog where you can choose the wallet type.

Running seedrecover.py with a GUI dialog
seedrecover.py opening the wallet type selection dialog

If you prefer command-line usage, you can copy examples from the documentation and adjust them for your own recovery. One small detail: some docs examples may show python at the beginning of the command. On macOS in this setup, I change that to python3 so it uses the correct interpreter.

The examples are intentionally simple. They are designed to let you quickly confirm that BTCRecover is working and give you a starting point you can edit for your specific wallet type, missing words, passphrases, or other recovery parameters.

Prevent macOS From Sleeping When the Display Is Off

If you plan to run BTCRecover for more than a few minutes, change one important macOS setting before you start.

Go to System Settings, then Energy, and enable “Prevent automatic sleep when display is off.” By default, macOS may slow things down once the display turns off or the screensaver starts. For long recovery jobs, that is not what you want. You want the machine to keep running at full power even if the screen goes dark.

Energy settings for preventing sleep
macOS System Settings showing Energy options

This is especially important on a dedicated offline Mac mini. You can let the display turn off to save power and reduce light, but you do not want the system sleeping or throttling while BTCRecover is working through a large search space.

Keep the Machine Offline Before Entering Real Seed Material

This is the part I cannot stress enough: after installation and testing are complete, take the Mac offline before entering any real recovery phrase or passphrase.

You need internet access to install BTCRecover and its dependencies. For test wallets and documentation examples, leaving it online may be acceptable during setup. But once you start typing sensitive wallet material into the machine, disconnect it from the network.

At minimum:

  1. Disable Wi-Fi.
  2. Unplug any Ethernet cable.
  3. Keep the system offline until you have regained access to the wallet and moved funds to a new seed phrase.

The reason is simple but serious: you want to make sure nothing malicious can communicate with the machine while your seed data is present in memory or on disk. That includes malware that may already be lurking, or something unexpected introduced during installation. Do not cut corners here. Do not assume it will not happen to you. A recovery job is not the time to take unnecessary network risk.

If this process feels too difficult, or if your funds are significant and you want professional help, I offer private consultations and trusted recoveries through my website: recovery services and consultations. For simple questions about the installation, YouTube comments are also a good place to ask; I do my best to reply.

Conclusion

Installing BTCRecover on macOS is not as simple as one copy-paste command, but it is very doable if you follow the documented process and pay attention to the Python environment. The key points are: use a dedicated machine when possible, install Homebrew first, make sure python3 points to Homebrew Python 3, install the extended requirements with the macOS-specific flags where needed, optionally add PyOpenCL for GPU acceleration, run the test suite, disable automatic sleep when the display is off, and keep the system offline before entering any real seed phrase.

If you follow those steps carefully, your Mac can become a practical, efficient, and secure platform for running BTCRecover on long Bitcoin wallet recovery jobs.

Stuck with a wallet recovery?

I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.

Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides