Shipping class: in-canada-lettermail-compatible
-
-
LuckFox Pico Mini B – RV1103 Linux Development Board (128MB)
Luckfox Pico Mini A RV1103 Linux Micro Development Board. Specifications Processor Cortex A7@1.2GHz + RISC-V NPU 0.5TOPS, supports int4, int8 and int16 ISP Input 4M @30fps (Max) Memory 64MB DDR2 USB USB 2.0 Host/Device Camera MIPI CSI 2-lane GPIO 17 × GPIO pins Default Storage (Mini B): SPI NAND FLASH (128MB) Full info and documentation:…
-
Raspberry Pi Zero 1.3
Raspberry Pi Zero 1.3 single board computer, ideal for use with SeedSigner or other similar projects. 1GHz single-core CPU 512MB RAM Mini HDMI® port Micro USB OTG port Micro USB power HAT-compatible 40-pin header Composite video and reset headers CSI camera connector Requires you to solder the GPIO pinheader on yourself.
-
-
Smartcard Hat for Raspberry Pi with USB-C Input power
This hat gives you a CCID/PCSC Compatible Smart Card interface that can connect over UART through a standard Raspberry Pi GPIO header. (Uses the SEC1210UR2 or SEC1210 URT serial interface) and also gives you a USB-C socket that you can use to power your device. Available in three variants, one for full sized cards and…
-
Specter Shield Budget Edition
Specter Shield Budget Edition – Add Smartcard and QR Functionality to Specter
-
-
USB Camera Module – GC0307 CMOS Sensor
Comes with camera module + connector cable as pictured. (No USB plug, you need to solder this) Module Size 25MM*8MM Sensor Gc0307 CMOS Sensor Resolution 640×480 Output Format YUV FOV 65 Lens 2.8mm Focus Type FF/MF Shutter Type ELECTONIC Output and Power Supply USB2.0 5V Interface 4 PIN 0.8MM Socket Controllable Parameters Brightness, Contrast, Saturation,…
-
Specter Shield Board
Specter Shield – Add Smartcard (Secure Element) backed storage, QR Scanner and Battery to your Specter DIY Hardware Wallet.