If you have used a Ledger Nano for Ethereum before, you may have run into a confusing problem: your coins seem to be missing from the address you expect. This is especially common if you started with the older Ledger Chrome app and later moved to Ledger Live, or if you are switching between MyEtherWallet’s new interface and the vintage interface.
The short version is this: a Ledger does not “store” one fixed Ethereum address in the way many people expect. Your device uses a seed plus a derivation path to generate addresses. If MyEtherWallet, Ledger Live, or another wallet uses a different derivation path, it can show you a different-looking address for the same Ledger. That does not mean your coins are gone. It usually means the wallet is looking in the wrong place.

Why a Ledger Can Show Different Ethereum Addresses
A hardware wallet like a Ledger Nano is based on one master seed. From that seed, wallets derive many possible keys using a derivation path. You may see paths written like:
m/44'/60'/0'/0m/44'/60'/1'/0m/44'/60'/2'/0
In Ethereum, the coin type is usually 60'. The numbers after that determine which account and address are used. If two wallets use different paths, they can generate different addresses from the same seed.
This is why you might see something like:
- An old Ledger Chrome app address in MyEtherWallet.
- A newer Ledger Live address in Ledger Live.
- Multiple accounts in Ledger Live that do not line up the way you expected.
The important point is that your coins are tied to a specific derived address. If you connect your Ledger with the wrong derivation path, MyEtherWallet may show an empty account even though another account on the same device has ETH or ERC20 tokens.
Old Ledger Chrome App vs Newer Ledger Live Behavior
One of the biggest sources of confusion is that older tools often used what we now think of as the “legacy” Ethereum derivation style for Ledger devices. MyEtherWallet may label this simply as Ethereum, but in practice it can represent the old Ledger Chrome app behavior rather than current Ledger Live behavior.
In other words, if you see an option called “Ethereum” and assume it means “current Ledger Live,” you may be mistaken. The default Ethereum path in MyEtherWallet may not match what newer Ledger Live creates when you add accounts.

This is especially relevant if you used the old Ledger Chrome app before Ledger Live became common. Your coins may still be sitting in that older-style account, even though your newer wallet is showing a different address.
How to Check the Derivation Path in Ledger Live
If you are using Ledger Live, one useful step is to check the derivation path for an Ethereum account. In some cases, you can open the account details or advanced logs and see something like:
44'/60'/0'/
This tells you which part of the path the account is using. If you compare that with what MyEtherWallet is showing, it becomes much easier to understand why one wallet shows a balance and another does not.

In my video, I used test accounts with small balances so it was easy to tell them apart:
- One legacy-style Ledger Chrome account.
- Two newer Ledger Live accounts.
The point is not the exact balance, but how each account maps back to a specific derivation path. Once you know which path matches your funds, you can use MyEtherWallet to access and send those funds.
New MyEtherWallet: Ethereum vs Ledger Live Choice
In the newer MyEtherWallet interface, when you connect a Ledger, you may be given a choice between something like Ethereum and Ledger Live. This is not about choosing two different coins. It is about choosing which derivation style MyEtherWallet should use to find your addresses.
If you are unsure which one to choose, think about how you originally set up the wallet:
- If you used the older Ledger Chrome app or an older Ethereum setup, try the Ethereum option first.
- If you added accounts in newer Ledger Live, try the Ledger Live option.
- Check the address shown in MyEtherWallet against Etherscan to see whether it has your balance.
If one choice shows the wrong address, switch to the other and check again. This is often faster than guessing.
The new interface also makes this easier because it can list multiple Ledger Live accounts when you choose the correct mode. That helps if you have more than one Ethereum account on your device.
Vintage MyEtherWallet: Manually Testing Derivation Paths
Many older guides, bookmarks, or links still point to the vintage MyEtherWallet interface. That version is useful because it lets you manually select different derivation paths. This can be very helpful when trying to locate old ETH balances or ERC20 tokens that are not showing up in the newer interface.
In vintage MyEtherWallet, you may see a screen asking you to select an HD derivation path. Some of these options may have labels that do not clearly mention Ledger Live. For example, one option may be labeled something like “Jack’s MetaMask” even though it can correspond to a Ledger Live-style path in certain cases.
This is where manual testing becomes useful. You can click through different paths and see which address matches the one holding your funds.

If you are trying to find lost coins, this is often the most practical approach: check each plausible path, compare the resulting address with Etherscan, and see whether that address has your ETH or ERC20 tokens.
How Ledger Live Increments Account Numbers
One of the trickiest parts is understanding how sequential accounts work in Ledger Live. In many wallets, especially Bitcoin-style wallets, you might expect the final number in the path to increment as you add new addresses. For example:
m/44'/60'/0'/0m/44'/60'/0'/1m/44'/60'/0'/2
But Ledger Live may not work that way for multiple Ethereum accounts. Instead, it can increment an earlier number in the path when you add a new account. For example:
- Account 0:
m/44'/60'/0'/0 - Account 1:
m/44'/60'/1'/0 - Account 2:
m/44'/60'/2'/0
This is why the accounts may not line up with what you expect from other wallets. If you are using vintage MyEtherWallet and manually testing paths, you need to change the correct number in the path to match each Ledger Live account.

This is also why it can be confusing when you compare MyEtherWallet and Ledger Live side by side. One tool may enumerate accounts differently from another, even though both are using the same underlying device seed.
How to Find Missing ETH or ERC20 Tokens Step by Step
If your coins seem missing, use this practical process:
1. Confirm you have the right wallet file or device connected
Make sure you are using the correct Ledger Nano and that it is unlocked. If you are using a recovery phrase in MyEtherWallet instead of the hardware device, make sure it is the same seed associated with the missing funds.
2. Open Etherscan for any address you remember
If you have an old address written down, paste it into Etherscan and check whether it holds ETH or ERC20 tokens. This gives you a target to match against.
3. Try the new MyEtherWallet interface first
Connect your Ledger and test both available choices:
- Ethereum
- Ledger Live
Check which address appears in MyEtherWallet and compare it with Etherscan. If one shows your balance, stop there. You have found the correct derivation path.
4. Use vintage MyEtherWallet if you need to test paths manually
If the new interface does not show the right account, open the vintage MyEtherWallet interface. Select different HD derivation paths and compare each resulting address with Etherscan.

5. Check ERC20 token balances, not just ETH
A wallet may show zero ETH but still hold ERC20 tokens. Once you find the correct address, check Etherscan for token holdings as well. This is important if you are looking for tokens rather than native ETH.
6. Send funds from MyEtherWallet once confirmed
Once you have identified the correct address and verified its balance, you can use MyEtherWallet to send ETH or ERC20 tokens to another address you control.

Before sending a large amount, it is wise to make a small test transaction first if possible. This confirms that the wallet can sign and broadcast transactions correctly with your device.
Security Notes When Troubleshooting Ledger Addresses
Because this topic involves lost or hard-to-find funds, be careful about where you enter your seed phrase. You do not need to type your recovery phrase into random websites just to check an address. If possible, use the hardware wallet itself through a trusted interface.
Also avoid sharing screenshots that expose:
- Full private keys
- Seed phrases
- Wallet passwords
- Sensitive account details beyond what is necessary
If you are using MyEtherWallet’s browser-based tools, make sure you are on the correct official site and that your device prompts are being handled carefully. If a website asks for your seed phrase in plain text when it should not be needed, stop and reconsider whether the tool is appropriate for your situation.
If you have tried multiple derivation paths and still cannot locate significant funds, it may be worth getting professional help rather than continuing to guess. You can learn more about recovery services and consultations here: recovery services and consultations.
Common Mistakes That Make Ledger ETH “Disappear”
Here are a few common mistakes I see in this situation:
-
Assuming one Ledger has only one Ethereum address.
A single seed can derive many addresses depending on the path used. -
Assuming MyEtherWallet’s “Ethereum” option always means current Ledger Live behavior.
It may represent an older derivation style instead. -
Only checking ETH and forgetting ERC20 tokens.
Some accounts hold tokens but no native ETH, or very little ETH. -
Using the wrong number in the derivation path.
If you are manually editing paths in vintage MyEtherWallet, changing the final digit may not match how Ledger Live creates additional accounts. -
Switching between interfaces without comparing addresses.
The fastest way to resolve this is to compare the address shown in the wallet with the address on Etherscan.
When to Use New MyEtherWallet vs Vintage MyEtherWallet
In general, I would start with the newer MyEtherWallet interface because it gives a clearer choice between Ethereum and Ledger Live modes. It can also list multiple Ledger Live accounts more conveniently.
Use vintage MyEtherWallet when:
- You need to manually test specific derivation paths.
- Older guides or links point you there.
- You are trying to locate an old balance that does not appear in the newer interface.
- You want to compare path options quickly and visually.
Neither version is “better” for every situation. The best one is the one that helps you find the correct address for your coins.
Final Thoughts
This topic feels confusing at first because it mixes several layers: Ledger seeds, derivation paths, old Chrome app behavior, newer Ledger Live account numbering, and two different MyEtherWallet interfaces. But once you understand the core idea, it becomes much more manageable.
The key takeaway is simple: your Ethereum address is determined by a seed plus a derivation path. If a wallet uses a different path, it can show a different address for the same device. To find missing ETH or ERC20 tokens, compare addresses with Etherscan and test the correct derivation paths in MyEtherWallet.
Once you have found the right account, sending your funds is usually straightforward from MyEtherWallet. The hard part is not spending the coins; it is knowing which address actually holds them.
Questions from viewers
Common questions from the comments on this video, with my answers.
Why can't I send ERC20 tokens from my Ledger if I have ETH in a different account?
Each Ethereum account on your hardware wallet is completely separate and standalone. The balance of one account cannot be used to pay for network fees in another. If you have an ERC20 token in Account A but no ETH in Account A, you will get an error saying the parent account has insufficient funds for fees. You need to have a small amount of ETH specifically in that same account to fund the transaction.
I sent ETH or tokens to the wrong network (like BEP20 instead of ERC20). How do I recover them?
This is usually a straightforward recovery process. You don't need to panic. I have specific videos covering how to recover funds sent to the wrong chain for Ethereum clones or Binance Smart Chain. The general approach involves using a tool like MyEtherWallet with your Ledger connected, selecting the correct derivation path, and switching the network to the one where the funds actually landed (e.g., BSC or ETC) to access them securely without entering seed phrases manually. (Apps and tools change, so check the current version if something looks different.)
My ERC20 tokens show up on Etherscan but not in Ledger Live. How do I view or send them?
Ledger Live does not support every single currency or token that your Ledger device supports. If you see the tokens on a block explorer like Etherscan but they are missing from Ledger Live, you should use a third-party interface like MyEtherWallet or MetaMask connected directly to your Ledger. In MyEtherWallet, you may need to add the token as a 'custom token' by entering its contract address, decimals, and name. Once added there, you can view and send the funds normally.
I lost my legacy Ethereum address after updating my firmware or resetting my Ledger. How can I find it again?
If you are having trouble locating an older address because the default derivation paths have changed or you reset your device, try using an automated search tool like FindEth.io. It works directly with your Ledger hardware wallet, so it is secure and doesn't require you to type in your seed phrase. It scans through various derivation paths to help you locate the specific address holding your funds. If that fails, you might also try enabling 'extended account search' in the experimental features of Ledger Live, though this is less reliable than dedicated tools. (Apps and tools change, so check the current version if something looks different.)
Can I share a single Ledger Nano S with family members or friends?
Yes, but you need to be careful about how you do it. The best way to share a single hardware wallet securely is by using BIP39 passphrases. This allows you to create distinct, separate wallets from the same seed phrase by adding a passphrase. Alternatively, some people just assign different PINs to different users, but this can get confusing quickly. Using passphrases ensures that each person's funds are logically separated and more secure.
Are all the addresses generated by my wallet mine? Can I send funds to any of them?
Yes, they are all unique to your specific Ledger or Trezor device, so they are all yours. Your wallet can generate a basically unlimited number of addresses. They just have different derivation paths to access them, which is why they might not automatically appear in apps like Ledger Live unless you explicitly add that specific account. As long as the address was derived from your seed phrase, sending funds to any of those valid addresses will keep them under your control.
Stuck with a wallet recovery?
I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.
Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







