Cryptotag Zeus – Unboxing, Setup and Review

If you are looking to hold cryptocurrencies for the long term, the quality of your backups is one of the most important things. You want your seed stored offline, because storing it online is a really bad idea. But you also want the physical copies you keep to be safe from common accidents like water damage, or less common events like fire.

There are now several metal seed storage products on the market that try to solve this. In this article, I am looking at the Cryptotag Zeus, a titanium plate backup system kindly sent to me by the people at CryptoTag. You can also Watch the video if you prefer seeing the full setup on screen.

What Is in the Box?

The Cryptotag Zeus is a two-plate titanium storage device. The plates clip together and open up to reveal numbered positions for stamping seed-related index numbers.

Full Cryptotag Zeus kit on a wooden table
Full Cryptotag Zeus kit: box, titanium plates, clips, stamper, earplugs, matches, conversion cards and setup guide

The kit includes everything you need for the basic setup process:

  • The two titanium plates
  • Metal clips to hold them together
  • A stamper tool
  • Earplugs
  • Matches for burning paper backups after verification
  • BIP39 conversion cards
  • An instruction guide, including a full BIP39 English word list

That last part is important. Right out of the gate, this gets a big tick because you are not expected to source extra tools or materials just to get started. The earplugs and matches are small touches, but they show that the company has thought about the practical side of setup and cleanup.

Why Metal Seed Storage Matters

A paper seed phrase is easy to read, but it is also vulnerable. Paper can burn, rot, fade, tear or be damaged by water. A metal backup gives you a more durable offline copy.

The Cryptotag Zeus uses titanium rather than aluminium. That matters because some cheaper metal backups are made from aluminium and may not survive serious heat. Titanium is much better suited to long-term storage where you want the backup to remain legible after damage, corrosion or fire exposure.

The plates are also thick enough that they should not crush or deform easily under normal handling. For a device intended to sit in a safe, vault or other secure location for years, that physical robustness is part of the point.

Setup Step 1: Write Down Your Seed Words on a Conversion Sheet

The setup process starts with your recovery words. Most software wallets and some hardware wallets give you a 12-word seed. Other hardware wallets, including many Ledger Nano models, often use a 24-word seed.

You need to write those words down on one of the included conversion sheets. You may do this directly from your wallet, or by carefully transcribing them from an existing paper backup.

Open setup booklet and blank conversion sheet
Setup booklet next to a blank numbered conversion sheet

This step is not optional if you want to use the device correctly. The Cryptotag Zeus does not store the words themselves as stamped text in the normal way. It stores index numbers that map back to words using a word list. That means your first job is to create a clean working copy of the seed phrase before converting it into numbers.

BIP39 Languages and SLIP39: Use the Correct Word List

This is the part I want to emphasise strongly.

The Cryptotag Zeus comes with the English BIP39 word list, but English is not the only valid BIP39 language. BIP39 supports multiple word lists. If your seed phrase was generated in another supported language, you need to use that language’s numbering system, not the English one.

BIP39 English wordlist on GitHub
BIP39 English wordlist showing numbered words such as abandon and ability

That is actually one of the useful things about this product: it can work with standard BIP39 numbering across supported languages, provided you print or reference the correct list. For some languages where you need more than just the first few letters to identify a word, this approach gives you an option that may not be available on simpler metal backup products.

However, there is another important case: SLIP39.

If your wallet uses SLIP39, such as some Trezor or Keystone setups, you need to use the SLIP39 word list and its numbering system. The numbers are different from BIP39 for the same word. Using the wrong list can make recovery impossible.

SLIP-0039 specification page
SLIP-0039 specification page showing Shamir’s Secret-Sharing for Mnemonic Codes

So if you are using anything other than an English BIP39 seed, make absolutely sure you are using the correct word list to generate the index numbers. Also document which word list was used with your backup. The numbers on their own are not enough. You may not remember where the seed came from ten years from now.

That said, I do like that Cryptotag uses standard BIP39 numbering rather than inventing its own proprietary encoding scheme. That means if you lose access to the original packaging or guide, it should still be possible in the future to print a copy of the relevant word list and decode what is stamped on the plates.

Setup Step 2: Convert Seed Words to Numbers

Once your seed words are written down, you need to find each word’s number in the correct word list.

For example, if one of my test seed words was “like”, I would look through the BIP39 English list and record its index number. In the video, that lookup process is shown using the included instruction manual, which contains a full BIP39 word list.

Instruction manual showing numbered BIP39 words
Manual page with numbered BIP39 English words and pen pointing to an entry

This step takes time. You are doing careful manual transcription twice: first from the wallet or paper backup into words, then from words into numbers. That is where mistakes can happen, so take your time.

Setup Step 3: Stamp the Numbers Into Titanium

Once you have your conversion sheet complete, you stamp each number into the corresponding position on the titanium plates.

The layout helps here because the conversion sheet and plate positions are arranged in a way that makes it easier to keep track of which number goes where. That reduces one type of error, but it does not remove the need for care.

Hands using stamper to punch digits into titanium plate
Stamping process shown with paper reference sheet beside the titanium plate

The stamper works by pressing a digit into the plate until you feel or hear it click. That leaves a small stamped mark in the metal.

One practical tip from the video: if the stamper does not fully retract after a strike, make sure it is completely out before trying to use it again. If it does not click properly on the second attempt, it may not have been ready for another stamp.

I also used the included earplugs during this part. They are simple foam plugs: roll them up, squish them, and put them in your ears. The stamping is noisy enough that they are a sensible inclusion if you do not want to blast your eardrums while working through 12 or 24 words.

Setup Step 4: Verify the Stamped Backup

This is the part I always insist on, especially because I deal with people who have made backup mistakes.

After stamping the numbers into the titanium plates, do not immediately destroy your paper backups. Instead, verify what you have done.

In the video, I transcribe the stamped numbers back onto another conversion sheet, convert them back into words, and then run a recovery check on that result. This confirms that the metal backup actually represents the same seed before anything is burned or discarded.

Verification process using numbered conversion sheet
Hand filling in numbered digit boxes while checking against titanium reference plate

This extra step matters because the whole point of a long-term backup is to be certain it works when you need it. A metal backup that looks complete but contains one wrong number can still fail at recovery time.

If your wallet supports recovery testing, use it. If not, carefully check the word list conversion again and compare against another trusted copy of the seed if you have one.

Closing the Device and Adding Tamper Evidence

Once verification is done, you close the two titanium plates back together and attach the clips.

Closed Cryptotag Zeus device
Closed titanium Cryptotag Zeus with brand logo and clip slots

At this stage, you can also add your own tamper-evidence mark if you want one. Something as simple as nail polish across the seam or clips can make it obvious if someone has opened the device without permission.

I would also strongly recommend including a note with the backup that specifies which word list was used: for example, “BIP39 English” or “SLIP39”. The device is designed around long-term holding, so you need to make sure future-you, or whoever inherits the backup, knows how to interpret the numbers.

Burning the Conversion Papers

After verification, the paper conversion sheets should be destroyed because they contain sensitive information: either seed words or enough mapping data to help someone reconstruct your seed if paired with other information.

The kit includes matches for this purpose. In the video, I use them to burn the papers after confirming the metal backup is correct.

This is a small but useful detail. The company has included the cleanup tooling as part of the product experience rather than leaving you to figure it out yourself.

Durability and Practical Trade-offs

The main advantage of the Cryptotag Zeus is durability. It is made from thick titanium, which should handle fire, water damage and physical abuse far better than paper or aluminium alternatives. The company also highlights destruction testing on its website, including claims that the product has been tested at very high temperatures.

Cryptotag website showing fire-test claim
Website screenshot showing titanium plate in flames with high-temperature test claim

That makes it a sensible option for people who want an offline backup that can survive serious physical damage.

The trade-off is the encoding process. Personally, I am not a huge fan of products where you first have to encode your seed into numbers. That introduces more opportunities for mistakes and removes some of the built-in redundancy and error checking that normal BIP39 phrases provide when you are working directly with words.

But there is also a benefit: because it uses standard word-list numbering, it can work with different BIP39 language lists and SLIP39, provided you use the correct list and document it clearly. It supports seed lengths from 12 up to 24 words, so it should fit most common wallet setups.

Who Is This For?

The Cryptotag Zeus is aimed at long-term holders who want durable offline seed storage and are comfortable with careful manual transcription. It is not the fastest backup method in the world. You have to write down your seed, look up numbers, stamp them into metal, verify everything, and then destroy the paper working documents.

If you do that carefully, it gives you a robust physical backup that should outlast many other storage media. If you rush it or use the wrong word list, you can create a backup that looks good but does not actually recover your wallet.

So my practical advice is this: treat it like any important recovery process. Do it slowly. Verify before destroying anything. Write down which word list you used. Keep the final metal device in a secure location separate from your live wallet and other sensitive materials.

If you have already lost access to funds or are unsure whether an existing backup is valid, you may want professional help rather than experimenting with damaged or incomplete recovery data. You can read more about that at recovery services and consultations.

Final Thoughts

The Cryptotag Zeus is a good metal seed storage option for people who want a durable, offline backup made from titanium. It includes the tools needed for setup, supports 12- to 24-word seeds, and uses standard BIP39 numbering rather than a proprietary system.

Its biggest strength is physical durability. Its biggest risk is human error during conversion and stamping. If you use the correct word list, verify the result carefully, and document what you did, it can be a solid long-term backup for Bitcoin or other crypto holdings.

Questions from viewers

Common questions from the comments on this video, with my answers.

If my titanium seed plate is stolen, can the thief access my wallet?

Yes. Your seed phrase is your wallet. Unless you are using a BIP39 passphrase to secure the backup, anyone who has the physical plate can look up the words and access everything.

Can I use a different language for my BIP39 word list if I store the index numbers on the plate?

No. BIP39 doesn't just use the indexes; it hashes the words themselves. You cannot simply switch between languages or rely on the numbers alone to restore in a different language. You must use the specific word list corresponding to the language your device expects.

Is it worth paying a premium for high-end metal backups like the Cryptotag Zeus or Swiss Hodlr disks?

It depends on your budget. The biggest question is whether it's worth paying as much as some of these options demand when you can get alternatives like the CryptoSteel capsule for much cheaper, or even the Keystone tablet punch if you are on a tight budget. Some elaborate devices might not be worth the price premium they demand. (Apps and tools change, so check the current version if something looks different.)

Should I engrave 'Crypto' on the front of the plate so I know what it is?

I find that people are more likely to misplace their seed due to not knowing what it is than to have someone break in and steal it. While putting fake information on the front might throw a thief off, the risk of losing it because you forgot what it was is generally higher.

How do I add a BIP39 passphrase to secure my backup?

You can add a BIP39 passphrase to secure the backup and store that separately. This prevents anyone with just the seed words from accessing your funds without the additional password.

Choosing a hardware wallet?

See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.

Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides