If your wallet is self-custody, your recovery seed is not just a code you write down and forget about. It is the thing that can restore access to your funds if your hardware wallet fails, gets lost, or needs replacing. That makes it one of the most important pieces in your security setup.
I do recoveries for people who have already had problems with their backups. I see seeds written on paper that has become unreadable, notes damaged by liquid, and copies made using number-based encoding schemes where a small transcription mistake turns into a failed recovery later on. That is why I take metal seed backup options seriously.
In this post, I will walk through the CryptoTag Loki, a titanium-based recovery seed backup system from CryptoTag. It is aimed at people who want a durable, fire- and water-resistant way to store a BIP39 12-word or 24-word seed without relying on paper.
What is in the box?
The CryptoTag Loki arrives in a sealed retail box, and it includes enough to set up a backup for either a 12-word or a full 24-word BIP39 seed.

Here is what I found inside:
- Instructions, accessed via QR code
- A pencil for marking the sheet before stamping
- Hearing protection for use during stamping
- An automatic center punch tool
- Privacy covers
- The CryptoTag Loki titanium seed backup sheet
The main improvement over earlier CryptoTag products is that this one does not require you to convert your recovery words into numbers first. Instead, it gives you a full A-to-Z letter grid so you can stamp the actual letters of each word directly onto the metal.
That matters because encoding errors are a real problem. If someone has to translate “organ” into some numeric code, then later decode that numeric code back into a word, there is more room for mistakes. With the Loki, you are working with the letters themselves.

Why direct letter stamping matters
In recoveries, I have seen people make mistakes when transcribing a seed into an encoded format. The problem is that the error may not show up until years later, when the person actually needs to use the backup. By then, it can be very hard to figure out what went wrong.
The Loki reduces that risk by storing the BIP39 words in a more direct way. You are still making a physical copy of your seed, so you need to be careful, but the process is simpler and less error-prone than number-based encoding.
That said, “simpler” does not mean “skip the check.” If you make any copy of your recovery seed, whether on paper, metal, or another medium, you should run a wallet recovery check before sealing the backup. That is one of the most important steps in this whole process.
How to use the CryptoTag Loki
The setup process follows the official documentation. The website includes vendor-specific getting-started pages for popular wallets, which is helpful if you are new to this kind of thing.

For the demo in the video, I used a Ledger backup as the example. The general process is straightforward:
- Start with your hardware wallet or software wallet and make sure you have access to the recovery seed you want to back up.
- Use the pencil to mark the first four letters of each BIP39 word in the correct grid positions on the titanium sheet.
- Double-check your markings before stamping.
- Put in hearing protection, then use the automatic center punch to mark each selected square.
- Run a recovery check on your wallet using the backup you just created.
- Only after that check passes, apply the privacy covers.

The reason you only need the first four letters of each word is that, for BIP39 English, that is generally enough to uniquely identify the full word. The sheet is designed around this idea, so you are not trying to engrave entire words by hand. You are marking coordinates in a grid and then punching them into place.
Stamping process
Once your pencil markings are done, the next step is to use the automatic center punch.
The basic technique is:
- Place the tip of the punch on the square you want to mark.
- Hold it steady with one hand.
- Press down with the other hand until you hear it click.
- Repeat for every marked position.
This creates small punched marks in the metal that represent the letters of your seed words.

The punch tool is one of the things I liked about this product. It makes the process easier and more consistent than trying to do it manually with a generic punch or improvised tools. The included hearing protection also makes sense, because repeated punching can get noisy.
Run a recovery check before sealing
This is the part I want to emphasize: do not apply the privacy covers until you have verified the backup works.
Before sealing anything, run a recovery check on your wallet using the seed you just backed up. If your hardware wallet supports a built-in recovery verification flow, use that. The point is to confirm that the physical backup actually restores the correct wallet.
If you skip this step and there is a mistake in the stamped seed, you may not discover it until much later. That is exactly when you do not want surprises.

If your wallet or backup situation gets complicated and you are unsure whether a recovery attempt is safe, it can be worth getting external help before proceeding further. I cover that in my recovery services and consultations page.
Applying the privacy covers
After the recovery check passes, you apply the included privacy covers. These are adhesive-backed sheets that go over the stamped area to hide the seed from casual viewing.
They are not a high-security tamper-evident seal. They are more of a privacy shield than anything else. You can peel them off and reapply them, but the number of times you can do that while keeping everything neat is going to vary.

A few practical notes:
- The covers are adhesive-based, so they are not meant to be opened and closed repeatedly like a hinged case.
- They do not turn the sheet into a tamper-evident device by themselves.
- If you want tamper evidence or physical mounting, you need to add your own solution. That could be something as simple as nail polish over the edges, a tamper-evident bag, or another method that fits how and where you store it.
Size and storage
One of the nice things about the Loki is its size. The finished device is only slightly larger than a standard credit card or smart card. That makes it compact enough to store discreetly in a safe, lockbox, or other secure location without taking up much space.
That is useful for people who want a physical backup that does not look like a big sheet of paper full of words. It also helps if you are storing multiple backups and need something that can be organized cleanly.
What I liked
The CryptoTag Loki builds on the strengths of earlier CryptoTag products, and in my view it improves them where it matters most.
Here is what stood out:
- Direct letter storage instead of number encoding. This makes the backup easier to understand and less error-prone.
- Good documentation. The vendor-specific setup pages are a real help for people who may not be deeply technical.
- Useful included tools. The automatic center punch, pencil, hearing protection, and privacy covers make the process practical out of the box.
- Compact size. It is small enough to store securely without being cumbersome.
- Supports 12-word and 24-word seeds. That makes it useful for a wide range of BIP39 wallets.
What to keep in mind
The Loki is a strong option, but it is not magic. A few things are worth understanding before you buy one:
- It does not include built-in tamper-evident sealing.
- It does not include physical mounting hardware.
- The privacy covers are adhesive-based and should be treated as a privacy layer, not a security seal by themselves.
- You still need to verify the backup with a recovery check before considering it complete.
If you want a more tamper-evident setup, plan on adding your own protection method. If you store this in a location where physical access is a concern, think about how you will secure it beyond the privacy cover itself.
Is the CryptoTag Loki worth it?
For self-custody users who want a durable metal backup for their BIP39 seed, the CryptoTag Loki is a very good option. It solves one of the biggest weaknesses in some earlier metal backup products by avoiding number encoding and letting you stamp the actual letters of your recovery words onto titanium.
That makes it easier to use, easier to verify visually during setup, and less likely to fail because of an encoding mistake. Combined with compact size and solid included tools, it is a practical upgrade for people who take seed backup seriously.
If you are already using paper backups or older encoded metal sheets, this is the kind of product worth considering as part of your security review. The key is not just buying a better storage medium; it is also doing the setup correctly and verifying that the backup actually works before you seal it away.

I have added the CryptoTag Loki to my metal seed storage feature comparison, so if you are weighing it against other options, that is a good place to look at the trade-offs side by side.
If you have questions about this device or your own backup setup, leave them in the comments. I do my best to reply to as many as possible.
Choosing a hardware wallet?
See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.
Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







