Cypherock X1 Review: Seedless Hardware Wallet with NFC Cards
In this guide, I’ll walk through the unboxing, setup, and review of the Cypherock X1. It is a Bitcoin-focused hardware wallet that takes a different approach from standard devices like Trezor or Ledger. Instead of relying on a paper BIP39 recovery sheet as your main backup, it uses four NFC smart cards to store Shamir-share backups.
If you prefer watching, Watch the video. But if you want a written version that is easier to search and keep for reference, this article covers the full process, the important warnings, and my practical takeaways after testing it.
The short version: the Cypherock X1 is an interesting option for experienced Bitcoin users who want seedless smart-card backups. It is not a drop-in replacement for a normal hardware wallet if you expect mobile support, multisig, third-party wallet integration, or deep Ethereum/DeFi usage. Its value is mostly in backup resilience and a different way to store BIP39 seeds securely.
What comes in the box
The Cypherock X1 kit includes more than just the main device. You get:
- The small black X1 reader/device
- Four numbered NFC smart cards
- USB-C cable with USB-C to USB-A adapter
- Lanyard
- Webcam cover card
- User manual and warranty information
- RFID-blocking case for storing the cards
- Stickers

The most important difference from a normal hardware wallet is that there are no recovery sheets in the box. The smart cards are both your backup mechanism and part of how you operate the wallet. That means you need to understand the card workflow before relying on this for real funds.
Setup requires the CYSync desktop app
At launch, setup was desktop-only through the Cypherock CYSync application. In the video, I checked whether a mobile-only setup was possible, and while the product mentions iOS compatibility, there was no Android or iOS mobile app available in that flow at the time of recording. So for setup, you need to use a computer.
Plug the X1 device into your PC with the included USB-C cable. The screen will guide you through basic navigation: left/right to move through options and center click to select. You can also test NFC tapping by placing one of the cards under the device.

Next, download and install CYSync from Cypherock’s website. The app supports Windows, Mac, and Linux. Once installed, open the desktop app and begin the new-device setup flow.

Pairing the X1 with four cards in order
The pairing process is where you need to pay attention. The device expects the cards to be paired in a specific sequence: card 1, then card 2, then card 3, then card 4. In my test, trying to use card 4 before card 2 returned an “invalid” result, so ordering matters.
The flow is straightforward once you understand it:
- Connect the X1 device to your computer.
- Open CYSync and start setup as a new device.
- Set a password for CYSync.
- Authenticate the device in the app.
- Tap card 1 when prompted, then remove it after completion.
- Repeat for cards 2, 3, and 4.
- Allow firmware updates if requested.
The cards are pre-provisioned from the factory as a matched set of four. You cannot simply mix random replacement cards into an existing working set later without following the full replacement process described below.
Creating a new wallet and setting a PIN
After pairing, you can create a new wallet or restore from an existing seed. In my test, I generated a new wallet first. The device lets you name the wallet, then asks whether you want to set up a PIN. This is one of the most important decisions in the whole setup.
The on-screen warning is clear: if you forget the PIN, you will lose access to that wallet. That is not a small detail. Because this system uses cards rather than a normal paper-only recovery flow, the PIN becomes part of your recovery model for each wallet stored on those cards.
After choosing or skipping the PIN, the device generates the seed and asks you to write down the recovery words on paper to verify them. In my test, it was a 24-word phrase. The device then verifies selected words with yes/no prompts. You should still treat this as a real backup step: write the words carefully, even if the cards are intended to be your primary backup method.

Once verification is complete, you tap the required cards and enter the PIN if one was set. The device tells you that you may safely wipe out any written seed after successful card verification. In practice, I would still keep a verified backup until you are fully comfortable with how the system works.
Importing the wallet into CYSync
After creating or restoring a wallet on the X1, you need to export it into CYSync so the desktop app can interact with it. The app lets you import up to four separate wallet accounts onto the same set of cards.
In my test, I imported the new demo wallet and added coins. The supported coins shown included Bitcoin, Dash, Dogecoin, Ethereum, Litecoin, and Nia. That is a useful selection for basic storage, but I would still treat this primarily as a Bitcoin-focused device rather than a full DeFi or multi-chain spending platform.

Receiving and sending Bitcoin
Receiving works through CYSync. You request a new address from the X1 device, verify it on the device screen, enter your PIN if required, and tap an X1 card. The app then shows the receiving address and QR code. One useful safety detail is that the app will not let you confirm until the address has finished scrolling on the device display.
Sending follows a similar pattern:
- Enter the recipient address in CYSync.
- Set the amount and fee.
- Confirm the amount and address on the X1 device.
- Enter the wallet PIN if one is set.
- Tap an X1 card to authorize the transaction.

I sent a test Bitcoin transaction during the review, and I could see it as pending before confirmation. That is good, because it means you can monitor transactions in the app rather than only relying on an external explorer.
Important limitation: this is not a DeFi wallet
While CYSync supports adding Ethereum tokens, there was no obvious way to use the device for swaps or WalletConnect-style interactions during my test. In practical terms, I would view the Cypherock X1 as a storage and signing device, not a general-purpose DeFi tool.
That is not necessarily bad. For many people, keeping cold storage separate from active spending wallets is a good security practice. But if you are looking for a hardware wallet that can easily connect to dApps or perform complex Ethereum interactions, this is probably not the right fit at launch.
Testing backup recovery and factory reset
One of the main reasons to consider the Cypherock X1 is its card-based backup system. I tested this by performing a factory reset using two cards. The device required a quorum before allowing the reset, which is a good security behavior.
After resetting the device, I re-paired the remaining cards and restored wallets from two of the four cards. This worked when I used the correct PIN. But here is the critical warning: if you set a wallet PIN during setup, the cards alone are not enough to restore that wallet without it.

This is where the Cypherock model differs from what many users expect from a standard BIP39 hardware wallet. If you enable a PIN for a given wallet and later forget it, those cards cannot simply restore that wallet on their own. You also cannot transact with that wallet, delete that forgotten-PIN wallet from the card set, or add another copy of the same wallet to the same card set without knowing the PIN.
If you still have the original seed words, your options are more limited than they should be: you may need to move to a new seed or get a new set of cards. That is why I would strongly recommend keeping a verified written backup of any important seed until you fully understand how this system works.
Importing an existing BIP39 seed
You can also import an existing BIP39 seed into the Cypherock X1. In my test, I imported a 12-word demo seed that has been publicly available for years and is used only for demonstration purposes. Do not send funds to addresses derived from public demo seeds. If you want to tip me, use my normal public tip addresses instead.
The import flow works like this:
- Pair the required cards if needed.
- Choose “restore from seed” rather than generating a new wallet.
- Name the wallet.
- Decide whether to set a PIN.
- Enter the BIP39 seed phrase on the device.
- Tap the cards when prompted.
- Verify the words as instructed.
- Export/import the wallet into CYSync.
Once imported, the app was able to find existing Bitcoin transactions associated with that demo seed. This confirms that the X1 can be used to bring an existing BIP39-based wallet under its card backup system.
BIP39 passphrase support
The Cypherock X1 supports BIP39 passphrases, but there is a workflow limitation I found during testing. If you want to add a passphrase to an existing wallet already present on the device, the flow required a factory reset in my test scenario. That made it faster to generate a brand-new wallet with the passphrase enabled than to try adding it to the existing one.
When importing a passphrase-protected wallet into CYSync, you will be prompted for the passphrase. The supported characters are uppercase letters, lowercase letters, numbers, and spaces, up to 64 characters. No symbols were allowed in that flow.
This is useful if you want an extra layer of protection beyond the seed itself, but it adds another thing you must back up correctly. A wrong or forgotten passphrase can make recovery much harder, especially when combined with a wallet PIN.
Replacing lost or locked cards
One of the most important parts of this review was testing what happens if you lose some cards. I ordered an additional set of four X1 cards and tested the replacement process. The key point is that each working backup system is based on a matched set of four cards. You cannot simply take two old cards from one set and replace them with two new cards from another set.
To replace lost or locked cards, you need to:
- Use surviving original cards to restore the wallets onto the X1 device.
- View and manually transcribe each seed back onto paper.
- Factory reset the device.
- Pair a full matched replacement set of four new cards.
- Restore all wallet seeds from your old backup source onto the new card set.

If you try to mix an old card into the new pairing process, the device will tell you it is the wrong set. This makes sense from a security standpoint, but it means replacement is more involved than simply buying one or two extra cards.
This also highlights why having a written seed backup matters during transitions. If you forget a wallet PIN and still have the seed, your options are limited unless you move to a new seed or replace the card set entirely.
Documentation, firmware, and audit
Cypherock publishes documentation for the X1 firmware, including communication details, proof-of-work behavior, and a responsible disclosure policy. That is good to see from a newer hardware wallet vendor. The X1 device uses a secure element similar to what was used in older Coldcard Mk2 designs, which helps explain why it can store shares and verify integrity.
The NFC cards are also secure elements, not simple blank smart cards. During review, I looked through the source documentation and code details to check things like seed generation. The most important external validation is the Keylabs security audit report for the Cypherock X1. It covers the design, threat model, Shamir Secret Sharing approach, JavaCard NFC cards, secure elements, and findings from their testing.

The important part of any audit is not just that issues were found, but that fixes were verified. In this case, Keylabs confirmed that fixes for findings had been verified after remediation. That does not make a device perfect forever, but it is a meaningful signal for a new product.
Current limitations to know before buying
The Cypherock X1 is innovative, but it is also new and different enough that you should understand its current limitations:
- Setup was desktop-only at the time of this review; no mobile app was available in the tested flow.
- There is no device PIN on the X1 itself in the same way many other hardware wallets offer one.
- Wallet PINs are critical. If forgotten, they can block recovery and management for that wallet even if cards exist.
- Replacing lost or locked cards requires a full matched replacement set of four cards.
- There is no multisig support in my tested experience.
- There is no third-party wallet integration mentioned in the normal flow.
- Ethereum token support exists, but DeFi and dApp interaction are not a strong fit at launch.
- Documentation and software maturity are still catching up to more established vendors like Ledger or Trezor.
I added the Cypherock X1 to my hardware wallet comparison table, and based on those features, it does not score as broadly as some mature options right now. That is mostly because of missing common features rather than a lack of security ambition. The product may improve over time, but until there is a clearer roadmap and more real-world usage history, I would treat it as an option for users comfortable with a newer system.
Who should consider the Cypherock X1?
I think this device makes the most sense for experienced Bitcoin users who already understand BIP39 seeds, passphrases, PINs, and backup risk. It is especially interesting if you want to move away from paper-only seed storage or distribute backup shares across multiple locations using smart cards.
It can also be useful as a seed-storage device even if you do not make all of your transactions through it. If your main goal is to store an existing BIP39 seed in a more resilient, card-based format, the Cypherock X1 offers one of the first real options I have seen for that use case.
If you are new to Bitcoin and are looking for the simplest possible hardware wallet experience, this may not be the best starting point. The PIN behavior alone requires careful understanding. A standard paper-backed BIP39 workflow is easier to explain and recover from for many people.
Final conclusion
The Cypherock X1 is a clever and security-minded approach to Bitcoin backup. Using four NFC smart cards as Shamir shares gives you a more resilient alternative to a single paper seed, especially if you want to store backups in different physical locations without carrying one obvious “master key” sheet around.
My main concern is the PIN model. If you set a wallet PIN and forget it, the cards alone are not enough for that wallet. You also cannot delete or re-add that wallet on the same card set without the PIN. That makes written seed backups important during setup, testing, and any future migration.
I would recommend the Cypherock X1 to experienced users who want a different backup model and are willing to follow the process carefully. I would not recommend it to anyone expecting a normal hardware wallet with mobile support, multisig, third-party integrations, or broad DeFi functionality at launch. If you choose this route, test recovery early, keep verified backups until you fully trust your setup, and understand exactly what happens if a PIN is lost.
If you have already lost access to funds and need help working through options, see our recovery services consultations page.
Questions from viewers
Common questions from the comments on this video, with my answers.
Does the Cypherock X1 wipe itself after several incorrect PIN attempts?
It doesn't just wipe immediately; instead, it uses a 'proof of work' mechanism that makes each subsequent incorrect entry take longer. This isn't just a timer but a physical operation on the device. The Keylabs audit notes that this process would eventually exceed the card's read/write cycle limit, effectively bricking the hardware if you kept trying.
Can I restore my wallet to a new device if I have both a BIP39 passphrase and a device PIN enabled?
Yes, provided you know both the PIN and the passphrase. When you enable a BIP39 passphrase, it becomes an essential part of your seed recovery, so you need it regardless of which wallet you are using. However, the device PIN is tied specifically to the cards; if you lose the PIN, you cannot recover via the cards alone and would need a standard backup of your seed words.
What happens if one of the smart cards gets damaged or lost?
You can still operate the wallet with as few as a single card. You can also restore backups using just two cards. However, if you want to add any new wallets to the system, you will need all four cards present. This means that while you can survive with fewer cards in the short term, you will eventually need to purchase replacements to maintain full functionality for adding new accounts.
Choosing a hardware wallet?
See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.
Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







