Ellipal X Card Review: Simple Cold Storage for BTC & ETH

The Ellipal X Card is a credit-card-sized cold storage option for Bitcoin, Ethereum, and other supported chains. It sits in an interesting middle ground: it gives you some of the simplicity of a phone-based wallet while keeping your seed offline during setup. The catch is that the card has no screen, so it cannot independently show receive addresses or transaction details. That makes it a blind signer, which is fine if you understand what you are giving up.

In this review, I unbox the X Card, initialize it with the included starter device, pair it with the Ellipal mobile app via NFC, and test receiving and sending Bitcoin. I also cover PIN behavior, BIP39 passphrase handling on smartcard wallets, a teardown of the starter device, and what happens when you enter the wrong PIN too many times.

Watch the video if you want to see the full setup and tests in action.

What comes in the box

The package includes the X Card itself, an RF-blocking sleeve, a quick start guide, a seed phrase sheet, a USB-C cable, and the separate starter device used to initialize the card.

Ellipal X Card unboxing layout
Unboxing layout showing the X Card, starter device, guides, seed sheet, cable, and box

The most important part of this kit is the starter device. It is what makes the X Card different from many other smartcard-based wallets. Instead of entering your seed into a phone or using a non-standard backup process, you initialize the card offline with this dedicated tool. That matters because it keeps the seed phrase out of your mobile environment during setup.

Ellipal X Card kit and starter device
The X Card, RF-blocking sleeve, starter device, quick start guide, and seed sheet

Initial X Card setup

Setup starts with the starter device. You remove the stickers from the card, insert it chip-side up into the starter, and choose to create a wallet. From there, you select a seed length and set a card PIN.

The video uses a 12-word seed for simplicity, but 18- and 24-word options are also available. You can set a six-digit PIN or make it longer. This is where I want to be clear about one important limitation: the X Card PIN cannot be changed later. If you forget it or mistype it too many times, your only option is to let the card wipe and then re-initialize it from your seed backup using the starter device.

So choose a PIN that is memorable but not obvious, and make sure you are comfortable with the fact that there is no “change PIN” flow after setup.

Backing up the seed phrase

Once the wallet is created, the starter shows the BIP39 recovery words. You write them down on the included sheet and confirm a small number of sample words to prove you recorded them correctly.

This is the same basic backup model as many other hardware wallets: your seed phrase is the key to your assets. If you lose it, you lose access. The X Card does not replace that responsibility; it just changes how the card gets initialized and used.

One small usability note from the video: the order of words on the paper sheet is not the same as the order shown on the screen. That can be confusing if you are doing your first backup, so take your time and double-check the confirmation step.

Pairing with the Ellipal app

After initialization, the starter device is done. You do not use it for normal wallet operations. From here, the X Card works through NFC with the Ellipal mobile app.

In the app, you select a new X Card, enter the card PIN, and tap the card to your phone’s NFC reader. The app then shows the supported chains and accounts you can work with.

Ellipal app pairing screen with X Card held near phone
Selecting coins in the Ellipal app while holding the X Card for NFC pairing

This is where the simplicity comes in. You do not need a separate desktop app, and you are not plugging the card into a computer for normal use. The phone app handles addresses, balances, markets, swaps, DeFi options, address book, currency settings, and other wallet features.

Receiving Bitcoin: no on-card address verification

When I selected a Bitcoin account in the app, it defaulted to nested Segwit but suggested native Segwit as an option. For this test, I left the defaults as they were.

The receive screen showed a QR code and receiving address in the phone app. Here is the important security point: because the X Card has no screen, there is no way to verify on the card itself that the displayed address actually belongs to the card. You are trusting the app to show you the correct address.

Ellipal app Bitcoin receive screen with QR code
Bitcoin receive address shown in the Ellipal app, not on the X Card

That is a meaningful trade-off compared with full-featured hardware wallets that can display and let you confirm addresses directly. If you are receiving large amounts or dealing with unfamiliar counterparties, this is something to weigh carefully.

Sending Bitcoin: blind-signer confirmation

Sending works from the app as well. You create the transaction in the phone app, review the details there, then enter the card PIN and tap the X Card to authorize it via NFC.

During the send test, I also noticed that the fee handling was restrictive. The app did not allow me to lower the suggested network fee below a certain level. That can be annoying if you want finer control over fees, but it may protect newer users from setting fees so low that transactions get stuck for a long time.

Ellipal app send screen prompting user to scan X Card
Send flow asking the user to use and scan the X Card

The key thing to understand is that the card did not display or confirm the transaction details itself. It signed what it was told to sign through the NFC interaction. That is why this type of device is called a blind signer. The security model depends heavily on trusting the app, your phone, and the connection between them.

Device and app settings

Once paired, you can manage some basic account-level details in the app. For example, you can rename the card or its associated accounts. You can also initialize up to ten cards with the starter device when first putting a seed onto them.

Beyond that, there is not much else to configure on the X Card itself because it is just a smartcard. The rest of the experience lives in the Ellipal app: assets, markets, swaps, DeFi features, address book, currency settings, and profile options.

Starter device options and BIP39 passphrase behavior

The starter device can be used to create a new wallet or recover an existing seed into a card. One option worth understanding is the BIP39 passphrase setting.

On many hardware wallets, you may enter a BIP39 passphrase at certain times during use. On this smartcard-based system, the passphrase must be set during initialization. That is because the card does not have enough processing power to derive wallet keys from your seed and passphrase in real time while you are using it.

This behavior is consistent with how Ellipal’s Titan devices work, but it may feel different if you are coming from another brand. If you enable a BIP39 passphrase, treat it as part of your backup. Write it down securely. If you lose the passphrase, you can lose access to funds that otherwise appear recoverable from your seed words alone.

Because this is an advanced feature and easy to misunderstand, I think it makes sense that it is hidden inside options and off by default. But if you do use it, make sure your backup plan includes both the seed phrase and the passphrase.

Starter device teardown: simple but tamper-aware

I opened up the starter device to see what was inside. It turned out to be simpler than I expected. The board uses a single-chip secure MCU with a smartcard interface, rather than a more complex multi-component design.

Opened Ellipal X Card starter device showing main MCU
Internal PCB of the starter device with the main MCU highlighted

The interesting part is that opening it tripped tamper protection. That is a good thing. If someone tried to modify the starter device and use it to initialize cards with unsafe seeds, they would not be able to do so quietly. The design appears low-cost but thoughtful: components are on one side of the board, buttons are etched directly into the PCB, and small spring domes provide the physical input.

That said, like other Ellipal devices, the starter device firmware is closed source. You have to trust Ellipal that the entropy generation used during seed creation is secure. That is a normal part of evaluating any hardware wallet, but it is worth stating plainly: the security of your new seed depends on trusting this offline tool at initialization time.

Smartcard inspection: locked like retail smartcards

I also checked the X Card itself using a USB/NFC smartcard reader and looked at its ATR string. The card appears to be an NXP P71 JavaCard, similar in class to other DIY-style smartcard wallet options.

Smartcard reader and ATR parsing for the X Card
X Card in a USB/NFC reader while inspecting its ATR

The card arrived locked, which is what you would expect from a retail smartcard product. That is reassuring: it has not been pre-initialized or left in an open state before reaching the user.

Wrong PIN wipe test

Finally, I tested what happens when you enter the wrong PIN too many times. After ten incorrect attempts, the card wiped itself and returned to a blank state. If you want to keep using that physical card, you would need to run through the recovery process again with your starter device and seed backup.

This is not a bad thing in isolation. It protects against casual PIN guessing on the card itself. But it does mean that if you lose both the card and your seed backup, or if you forget the PIN and do not have a clean restore path, you can be locked out of funds.

If you are already dealing with lost access, forgotten credentials, or a complicated recovery situation, my recovery services page covers when professional help may make sense.

Who the Ellipal X Card is for

The Ellipal X Card is a much simpler device than Ellipal’s other Titan offerings. That simplicity comes with significant trade-offs, especially around address and transaction verification. You cannot independently confirm receive addresses or detailed transaction data on the card itself because there is no screen.

That said, it does something very useful that many smartcard-based wallets do not: it keeps seed initialization offline using a dedicated starter device. Most other smartcard options either use non-standard backups or require putting your seed into a phone during setup, which makes the seed hot in the process. The X Card avoids that by generating and initializing the card on an offline tool.

For someone holding medium amounts of funds and wanting a simpler, more portable cold storage option for regular transactions, trading, or chain hopping, this may be worth considering. For people who want full address verification, detailed transaction display, and stronger protection against compromised phones, a screen-based hardware wallet is likely the safer choice.

Bottom line

The Ellipal X Card is an interesting step in smartcard-based cold storage. It is simple, portable, and backed by an offline initialization process that keeps your seed out of your phone during setup. The main downside is clear: it is a blind signer. You are relying on the app to show you what you are receiving and sending.

If you understand that trade-off, keep your PIN secure, back up your seed properly, and treat any BIP39 passphrase as part of your backup, the X Card can be a practical option for simpler cold storage with Bitcoin, Ethereum, and other supported chains.

Choosing a hardware wallet?

See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.

Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides