Ellipal Titan Mini: Unboxing, Setup and Review

In this article, I’ll walk through an unboxing, setup and review of the Ellipal Titan Mini hardware cryptocurrency wallet, and compare it with the original Ellipal Titan. If you prefer to watch, Watch the video.

For those who don’t know much about Ellipal: they have been in the hardware wallet space for a while, releasing their first device back in 2018 and taking a different approach from many competitors. At a time when most hardware wallets were wired and depended on a desktop PC, Ellipal launched a QR-code-based, air-gapped, mobile-first device.

My main concern with devices like this is that they are closed source. But because Ellipal has been around since 2018, they do have some track record. So I wanted to see what they had done with the Titan Mini — and whether it was actually safe and usable out of the box.

What Is in the Box?

The Titan Mini is smaller than the original Ellipal Titan, but it is still larger than compact wallets such as a Ledger Nano S. It uses QR codes to communicate with a mobile app, which keeps it air-gapped during normal use rather than relying on USB.

Ellipal Titan Mini and original Titan side-by-side
The Titan Mini is smaller than the original Titan, but still larger than compact wallets

Here is what I checked for in the box:

  • Instruction manual
  • Recovery seed sheets
  • microSD card (a 16 GB one was included)
  • Magnetic charging adapter
  • USB-C cable
  • Carry case
  • The Ellipal Titan Mini device itself

One useful detail: the Titan Mini uses USB-C, not just micro-USB. Like the original, it also has a magnetic charging port that clips on rather than using a standard USB port directly on the device body.

Initial Device Setup With the Mobile App

The first thing you need to do is install the Ellipal companion app on your phone. In my test, I used an iPhone and downloaded the app from the store.

Ellipal Titan Mini showing QR code and companion app
Start by downloading the Ellipal mobile app

Once the app is installed, you begin the new-device setup flow before connecting the hardware wallet. The app walks you through creating an account and setting a password.

A few important notes from the setup:

  • I chose SegWit for Bitcoin, because that is the sensible default in 2022.
  • I did not add a passphrase at this stage.
  • The app showed strong warnings about backing up your recovery phrase safely and keeping it away from cameras.

Those warnings are important. If you lose your backup, you can lose access to your funds.

Creating and Verifying the BIP39 Backup

The Titan Mini uses a BIP39 recovery phrase. In my test, I wrote down the 12 words onto one of the included paper sheets.

Writing the recovery phrase on paper
Write down your recovery phrase and store it safely

After writing it down, the app asked me to verify the mnemonic by entering the words in the correct order. The app shuffled the words around, so I had to re-enter them as they originally appeared. This is a good security step because it forces you to confirm that you have recorded the phrase correctly.

Once verification was complete, I selected supported coins and enabled everything for my demo wallet. Then I connected the physical Titan Mini by scanning QR codes between the phone and the device.

Connecting the Titan Mini via QR code
Pairing is done by scanning QR codes between the app and device

This is where the air-gapped workflow becomes clear: you are not plugging the wallet into your computer for normal use. Instead, data moves through QR codes between the mobile app and the hardware device.

Receiving Bitcoin on the Ellipal Titan Mini

After pairing, the phone and the hardware wallet showed the same accounts. For Bitcoin receive, I checked that the address shown in the app matched the address shown directly on the Titan Mini screen.

Matching Bitcoin receive address on app and device
Always verify the receive address on the hardware device

This step matters a lot from a security perspective. If your phone or computer has malware, it can lie to you about addresses. The whole point of checking the address on the hardware wallet is that it gives you an independent confirmation before you send funds somewhere.

Demo Sending Bitcoin

For sending, I opened Bitcoin in the app and started a transaction to my tip address. I sent the maximum amount available in the demo wallet.

One thing worth noting: the fee estimate shown by the app looked very high compared with the current network fee rate at the time, so I forced it down manually before continuing.

Signing a Bitcoin transaction with QR codes
The phone creates an unsigned transaction QR code for the device to sign

The workflow is:

  1. Create the transaction in the mobile app.
  2. The app shows unsigned-data QR code(s).
  3. Scan them on the Titan Mini using its camera.
  4. Enter your password on the device.
  5. Review the transaction details on the hardware wallet.
  6. Confirm that the address and amount are what you expect.
  7. Sign the transaction.
  8. Scan the signed-data QR code back into the app to broadcast it.

In my test, this worked once the firmware situation was resolved. But I need to be clear: there were serious problems at launch.

Device Settings Overview

The on-device settings are simple. You can change languages, check version information, and update firmware from the device itself.

Titan Mini settings menu
Settings include language, update, and about options

This is not a deeply configurable wallet. It is designed to be straightforward rather than advanced.

Ellipal Titan vs Ellipal Titan Mini

I compared the original Ellipal Titan with the Titan Mini using the same wallet on both devices. When I checked Bitcoin receive, both showed the same address, which is what you would expect from the same recovery phrase and derivation settings.

The two devices support pretty much the same coins in a similar order, but there are differences:

  • Some coins available on the original Titan were not available on the Mini at the time of testing.
  • Cardano appeared to be supported according to Ellipal’s coin list, but it was missing from the device I had during early testing.
  • The Mini is significantly smaller than the original Titan, which was almost smartphone-sized.

So if you are coming from the original Titan, the Mini feels like a major hardware refresh with a similar software experience on the surface — but it has been reworked substantially underneath.

Firmware Update: Why This Part Matters

This is where the review gets uncomfortable.

The firmware that shipped with my early sample was not safe or reliable to use. Wallets generated on that initial firmware could run into obscure send errors, missing features, failed updates, and in at least one case a device entered a boot loop. In other words: if you bought this during its first few months after launch, you were effectively participating in an open beta without your knowledge or consent while storing real money on the device.

The firmware update process requires:

  1. The included magnetic adapter
  2. The included microSD card
  3. A standard USB SD reader
  4. A downloaded firmware file from Ellipal’s support page
  5. Sufficient battery charge — the app asks you to ensure at least 50% power before starting
Firmware update instructions on Ellipal support page
Ellipal’s support page explains how to check versions and update firmware

The physical process is:

  1. Power off the device.
  2. Put the microSD card into the magnetic adapter.
  3. Clip the Titan Mini onto the adapter using the magnets.
  4. Connect it to power.
  5. Open Settings on the device.
  6. Start the update from the Update option.

The magnetic connection is fairly idiot-proof because you cannot attach it the wrong way, which is nice. But the process itself is fragile enough that I ended up breaking two devices during this test.

Firmware Update Attempts and Replacement Device

My first update attempt did not finish cleanly. The device appeared to be stuck in a boot loop after the update had been sitting for a while. My second sample also failed, so I ended up with two broken units in one video — which is certainly a record I would rather not set.

Eventually, Ellipal sent out a replacement device. That unit shipped with firmware version 1.4, which was much newer than the original samples I had received. The current version at the time of recording was 3.0.

The third update attempt worked. After updating, the device booted properly and I could continue testing.

New Firmware Features

After the successful update, I noticed a few improvements:

  • A screen lock had been added, which was missing before and should have been there from day one.
  • More coins became available, including Cardano in my test.
  • General stability improved compared with the early launch firmware.

That said, the experience still shows why you need to be careful with closed-source hardware wallets: there is no full public change log, so you are relying on the vendor’s support process and community reports to understand what has actually changed.

Who Is This Wallet For?

The Ellipal Titan Mini is best suited to basic users who want a simple, mobile-first, air-gapped wallet and are comfortable trusting a closed-source vendor and its companion app.

It is not well suited for advanced use cases such as:

  • Multiple complex account setups
  • Multisig workflows
  • Message signing
  • Users who need full open-standard flexibility
  • Anyone who wants to avoid relying on a single vendor’s software stack

If you want something simple, the Titan Mini can do that. If you want more control and standards-based options, it is probably not the right fit for you.

One Niche Feature That Is Genuinely Useful

There is one feature I find useful even as a more advanced user: the ability to import raw single private keys.

If you have old paper wallets for coins such as Bitcoin, Litecoin, or Dogecoin, Ellipal is still one of the few hardware wallet options that lets you import those single private keys and sweep the funds securely. That can be much simpler than doing offline signing with tools like Electrum, especially for people who are not technical.

You do not have to keep the funds on Ellipal long term just because you used it to sweep them in. But for that specific job, it is handy.

Security and Trust Considerations

There are a few important points to keep in mind:

  • The device is closed source, so you need to place a fair amount of trust in Ellipal.
  • The QR-code data format used between the app and device is open and published, which means technically inclined users can inspect what is being exchanged.
  • If you do not want to trust the device’s entropy generation, you can generate your seed phrase using dice or another external method.
  • Because Ellipal uses BIP39 recovery phrases, in an emergency you can import your recovery phrase into another standard wallet to regain access to funds.

That last point is critical — but I need to be very clear: you should never need to do this during normal operation. Importing a hardware wallet seed into software undermines the security model of a hardware wallet and makes it much easier to get scammed or lose funds if your computer or phone is compromised.

If you are dealing with a broken device, stuck funds, or a recovery situation that feels risky, I also offer recovery services consultations for people who need practical help working through the problem safely.

Conclusion: A Simpler Device With a Rocky Launch

The Ellipal Titan Mini is an improvement over the original Titan in terms of size, form factor, and price while offering broadly similar functionality. It is clearly a major refresh in both hardware and software.

But the launch was extremely rocky. Advertised features were missing at first, firmware updates failed or were not detected on some devices, users reported problems publicly, and early units shipped with firmware that simply should not have been considered safe for real funds.

If you are buying one now, I would still treat it as a basic wallet: useful if simplicity is your priority, but not the best choice if you need advanced features or open-standard flexibility. Keep an eye on Ellipal’s support channels and community reports, make sure your firmware is current before storing meaningful amounts, and never rely on importing seeds into software unless you are in a genuine emergency.

If you want to see the full hands-on demonstration, including the unboxing, setup, Bitcoin test, and firmware update attempts, watch the video above or leave a comment with any questions.

Questions from viewers

Common questions from the comments on this video, with my answers.

Is the Ellipal Titan Mini suitable for users who prioritize privacy?

If you are looking for a device that prioritizes privacy, this is likely not the right choice for you. The mobile app requests permissions like reading phone status and identity, and it includes built-in trackers. While these might not seem overly invasive to everyone, they are significant factors if your main concern is keeping your digital footprint minimal.

Why does the device only generate a 12-word seed phrase, and is that secure?

The device generates a 12-word seed by default, but you can import longer seeds (up to 24 words) if you create them elsewhere. The reason some people worry about the 12-word length is that the checksum is weaker, which makes it easier to make a typo without the system detecting it immediately. It’s not inherently 'weak' in terms of encryption strength, but the error detection is less robust than with longer phrases.

Will my crypto balance disappear if I update the firmware?

I haven't personally experienced funds disappearing after an update, nor do I use Ellipal as my daily driver. However, if there is an issue, it is usually just that the balance displayed in their app is incorrect. Your actual funds remain safe on the respective blockchains; the problem is typically just a display or synchronization glitch within the software. (Apps and tools change, so check the current version if something looks different.)

How do I store my seed phrase on the included metal backup plate if the words are too long?

You don't need to write out the full word. All English BIP39 words are unique based on their first four letters. So, you only need to engrave or store the first four letters of each word on the metal plate. This ensures you can recover the correct word later without needing the full spelling.

Choosing a hardware wallet?

See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.

Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides