CoolWallet Pro Unboxing, Setup & Review (BTC, ETH)

The CoolWallet Pro is a thin, credit-card-sized hardware wallet from CoolbitX. It’s the updated version of the original CoolWallet S, and in this article I’ll walk through what you get, how to set it up, and what I think about using it for Bitcoin, Ethereum, BNB, Cardano, Solana, Polkadot, and other chains.

If you want to see the full walkthrough on video, Watch the video.

CoolWallet Pro unboxing layout with card, box, cable, recovery sheet, and guide
The CoolWallet Pro unboxing layout on a wooden table.

What You Get in the Box

When you open the box, you get:

  • The CoolWallet Pro card itself
  • A micro-USB charging cable
  • A black charging dock
  • Recovery sheets
  • A “Get Started” guide with QR codes and button explanations

The device is very close to a standard credit card in size. It’s thin enough that it can sit in your wallet, and the form factor is almost identical to the original CoolWallet S. If you already own an S, the Pro mainly adds more coin and chain support while keeping the same general design and security model.

Before doing anything else, I put the card on its charger. The e-ink display shows a battery icon and “PLEASE PAIR,” which tells me it’s ready for setup.

Initial Setup: App Install and Bluetooth Pairing

The first thing you need to do is install the CoolWallet app. In this review I’m using iOS, but the same general process applies on Android.

One thing worth noting: the app can also be used in a hot-wallet style if configured that way. For this setup, I want to use it as a cold wallet with the physical card.

1. Install the CoolWallet App

Open your phone’s app store and install the official CoolWallet app.

iPhone running the CoolWallet app pairing dialog while the card shows PLEASE PAIR
Pairing the CoolWallet Pro from the mobile app.

2. Pair the Card Over Bluetooth

Open the app and start the device setup. You’ll be asked to use Bluetooth. The app will show nearby CoolWallet devices, so if you have more than one, make sure you select the correct one by matching the serial number on the card to the one shown in the app.

This is an easy mistake to make if you own multiple cards, so take a second and check that serial number carefully.

3. Enter the Pairing Code

After selecting the right device, the card displays a pairing code. Type that code into the app to complete the initial pairing.

Once paired, the device may prompt you for a firmware update.

Firmware Update

The CoolWallet Pro asked for a firmware update during setup. This is normal, especially on a fresh device or after a factory reset.

4. Keep It Charging During the Update

Leave the card connected to its charger while the update runs. The app says it can take around two to ten minutes. In my case, I confirmed that the red LED was lit so I knew it was definitely charging.

After the firmware update finished, the device asked me to pair again. That’s not unusual after a firmware change, so don’t panic if you need to repeat the pairing step.

CoolWallet Pro in charging dock with app Bluetooth pairing screen
The card in its dock while the app handles Bluetooth pairing.

Seed Generation: The Number-Based Recovery Phrase

Now we get to the part that matters most for long-term security: generating your recovery phrase.

Like the original CoolWallet, the Pro gives you an option to generate the recovery phrase using either the card or the app. The app warns that card-based generation is higher security. Honestly, I’m not sure why they even give you the app option if you’re trying to keep things as secure as possible. For a hardware wallet, I’d choose the card method whenever available.

5. Choose 24 Words When You Can

When offered a choice of seed length, choose 24 words if possible. A longer seed is generally more secure and less error-prone. It takes a little longer to write down and verify, but that’s worth it for something you may rely on for years.

6. Write Down the Numbers Shown on the Card

The CoolWallet Pro does not show full BIP39 mnemonic words directly. Instead, it shows numbers that map to specific BIP39 seed words. You write those numbers down on the recovery sheet provided in the box.

Recovery Seed Card with printed security warning
The CoolWallet Recovery Seed Card and its printed warning.

This is where you need to be careful. Your recovery phrase is your wallet. If someone gets it, they can access your funds. Keep the paper safe, don’t photograph it carelessly, and don’t store it in an unencrypted cloud note or email attachment.

If you’re already worried about a previous wallet, a lost recovery sheet, or whether you still have enough information to recover funds, I also cover that in my recovery services consultations. But the best time to think about this is before something goes wrong.

Verifying the Recovery Phrase

After writing down the numbers, the device asks you to verify them by summing the values and entering the total back into the card.

This step sounds simple, but it’s where many people get sloppy. You want to avoid typing your full recovery phrase into a computer or phone if you can help it.

7. Verify Without Entering the Full Phrase Into One Device

My practical suggestion is to split the work:

  1. Add up the first half of the numbers on one device.
  2. Add up the second half on another device.
  3. Add those two totals together.
  4. Enter only the final sum into the CoolWallet Pro.

This reduces the risk that a single compromised or keylogged device sees all 24 values at once. Even if someone captured only one half, they still don’t have enough to reconstruct the full seed.

Seed verification formula graphic showing two halves summed separately
A simple way to verify the seed without entering the full phrase into one computer.

For demonstration in the video, I used Windows Calculator, but for maximum caution you could use a basic offline calculator or even do it by hand.

8. Enter the Total and Confirm Verification

Enter the final sum into the card. If it matches, the wallet creation process continues. In my case, after verification succeeded, the app moved on to adding the wallet and enabling coins.

App seed-verification prompt with Windows Calculator showing a total
Verifying the seed by entering only the final calculated sum.

Enabling Coins and Chains

Once your wallet is created, you can enable the coins and chains you want to use. In this review I enabled several assets, including Bitcoin, Ethereum, BNB on Binance Smart Chain, Cardano, Solana, and Polkadot.

The Pro supports more chains than the original CoolWallet S, which is one of its main upgrades. That said, the overall experience still feels very much like the same family of device: compact, phone-driven, and focused on discretion rather than bulky mainstream hardware wallet ergonomics.

Receiving Bitcoin

To receive Bitcoin in the native app, you go to Bitcoin and tap Receive. The app gives you a QR code and address.

One important detail: with this workflow, you generally have to manually add individual addresses if you want them saved or reused in a particular way. Otherwise, the same receiving addresses may be reused over and over.

CoolWallet app BTC Receive screen with QR code and card beside it
Receiving Bitcoin from the native CoolWallet app.

Another thing to note: there isn’t really an ability on this device itself to verify receive addresses in the same way you can on some other hardware wallets. That’s one of the trade-offs that comes with the form factor.

CoolWallet App Overview

The app is where most of your day-to-day interaction happens. You can use it to:

  • Send and receive supported assets
  • View balances and history
  • Access built-in exchange or buy options through third-party services
  • Browse a marketplace area for DeFi-related features
  • Connect with tools like WalletConnect, OpenSea, and MetaMask

The app also supports the new QR-code-based method for interacting with MetaMask. That’s similar to what you see with some other mobile-friendly hardware wallets, such as Keystone-style workflows. It’s useful if you already use MetaMask heavily, though it does add a bit of friction compared with using the native CoolWallet app directly.

CoolWallet mobile app dashboard and physical card
The CoolWallet app dashboard next to the physical card.

Security and Privacy Settings

This is one of the most important parts of the review, because the security model here is different from devices like Ledger or Trezor.

The Card Does Not Have Its Own Device PIN

Unlike many mainstream hardware wallets, the CoolWallet Pro does not have a separate device PIN that you enter directly on the card every time you use it. Security depends heavily on:

  • Your phone being locked
  • The CoolWallet app password being set
  • You being selective about which phones pair with the card
  • Not leaving the card and an unlocked phone together carelessly

If someone has access to your unlocked phone, can open the CoolWallet app, and knows how to use it, they can potentially use the paired card without another device-level PIN. That’s a real trade-off of this design.

Set an App Password

You should set a password in the CoolWallet app. This adds a layer of protection if your phone is left unlocked or briefly unattended.

App Create a Password screen next to the card
Setting an app password for the CoolWallet app.

Change the Displayed Balance for Privacy

By default, the card can display your Bitcoin balance on its e-ink screen. If you carry this in your wallet every day, that may not be something you want publicly visible.

A simple privacy trick is to switch the displayed balance to Bitcoin Cash instead of Bitcoin. If your Bitcoin Cash balance is zero, the card no longer advertises your actual Bitcoin holdings while still leaving the Bitcoin wallet functionality unaffected.

App Settings menu with card showing a Bitcoin symbol and zero balance
Using settings to reduce public exposure of your displayed balance.

This isn’t perfect privacy, but it’s a practical improvement for a device that lives in your pocket.

Receiving BNB on Binance Smart Chain

For the MetaMask demonstration, I sent some BNB to the wallet on Binance Smart Chain. To receive BNB, you use the app as usual: select the asset, tap receive, and copy or scan the address.

CoolWallet mobile app wallet list with physical card
The app wallet list next to the CoolWallet Pro.

Using CoolWallet Pro With MetaMask

One of the more interesting features is MetaMask integration through QR codes. This can be handy if you already use MetaMask for DeFi, NFTs, or multi-chain activity.

9. Connect From the CoolWallet App

In the CoolWallet app:

  1. Go to Marketplace.
  2. Scroll down to MetaMask.
  3. Choose to synchronize the wallet.
  4. The app displays a QR code.
CoolWallet Cold Wallet view and MetaMask extension
Using CoolWallet with MetaMask.

10. Scan the QR Code in MetaMask

In MetaMask:

  1. Click the little colored dot or account icon.
  2. Choose to connect a hardware wallet.
  3. Select the QR-based option.
  4. Allow camera access if prompted.
  5. Scan the QR code from your phone.

MetaMask then shows the connected address, which should match the Ethereum address you see in the CoolWallet app. In my test, I sent 0.1 BNB to that address and it appeared correctly on Binance Smart Chain.

Sending Funds Via MetaMask

Sending through MetaMask works, but it’s not as seamless as using the native app.

11. Start the Transaction in MetaMask

In MetaMask:

  1. Select the asset you want to send.
  2. Enter the destination address and amount.
  3. Click Next.
  4. Confirm the request signature prompt.

MetaMask then shows a QR code containing the transaction data that needs to be signed by your hardware wallet.

12. Scan MetaMask’s QR Code Into CoolWallet

Go back into the CoolWallet app, scan the MetaMask QR code, and confirm the transaction on your phone. You’ll also need to connect the physical card and press its button to approve the signature.

Touch ID prompt on phone with card beside it
Authorizing wallet access before signing.

13. Return the Signed Transaction to MetaMask

Here’s where the friction comes in: after CoolWallet signs the transaction, you get another QR code from your phone. You then have to take that signed QR code back into MetaMask and complete the signature request there.

CoolWallet app showing a signed BSC transaction QR code and MetaMask requesting signature
Returning the signed transaction from CoolWallet to MetaMask.

It works, but it’s definitely not as smooth as using the built-in send flow. If you use MetaMask regularly, this is still useful. But if your main goal is simple sending and receiving, the native app will feel easier.

Enabling Destination Address Confirmation on Card

This is a setting I think should be turned on by default.

By default, when confirming transactions, the card may not show the destination address in full detail. In my MetaMask test before enabling this setting, the device showed limited information, and you had to rely heavily on what was displayed on your phone screen.

That’s a real security concern. If something goes wrong with your phone, app display, or transaction data, you want the hardware wallet itself to show the destination address so you can verify it independently.

14. Turn On Display Destination Address on Card

In the CoolWallet app:

  1. Go to Settings.
  2. Find the option for displaying the destination address on the card when confirming transactions.
  3. Enable it.
App Settings toggle for showing destination address on the card
Enabling destination address confirmation on the CoolWallet Pro.

I strongly recommend turning this on. It’s not a perfect solution, but it gives you a much better level of transaction verification than having to trust only your phone screen.

Sending Bitcoin in the Native App

After enabling destination address confirmation, I sent some Bitcoin using the native app instead of MetaMask.

15. Scan or Enter the Destination Address

In the CoolWallet app:

  1. Select Bitcoin.
  2. Tap Send.
  3. Scan the destination QR code or enter the address manually.
  4. Choose the amount. I sent the maximum available in this test.
  5. Tap Next.

16. Confirm on Phone and Card

The app then shows the transaction details, including amount, fee, and destination address. You confirm with your phone’s biometric prompt if enabled, connect the card, and press its button to approve.

CoolWallet Pro card being pressed while app confirms a Bitcoin send
Pressing the card button to approve a native Bitcoin transaction.

With destination address confirmation enabled, the card shows parts of the receiving address across multiple screens so you can check it before approving. In my test, I could see the address segments and amount on the e-ink display.

App showing Bitcoin send in progress while card displays the amount
A native Bitcoin transaction being processed.

One thing to remember: the balance shown on the card only updates when it’s connected to your phone through the app. It does not magically refresh by itself like a standalone ticker device.

Who Is the CoolWallet Pro For?

The CoolWallet Pro is really very much in the same family as the original CoolWallet S. The main difference is that it supports more coins and chains. Other than that, you get the same general form factor and security model.

It’s a good fit if you want:

  • A thin, credit-card-sized wallet
  • Something discreet enough to carry in your pocket
  • Water resistance and tamper-evident packaging/design considerations
  • A device that works primarily with your phone
  • Support for Bitcoin, Ethereum, BNB, Cardano, Solana, Polkadot, and other chains

It’s less ideal if you want:

  • The most robust transaction verification experience available
  • A device PIN entered directly on the hardware wallet every time
  • A more traditional mainstream hardware wallet workflow with a larger screen and richer on-device confirmation

None of those trade-offs are automatically deal-breakers. They’re just things to understand before buying. If discretion, travel convenience, and a credit-card form factor matter most to you, this device makes sense. But the experience will be different from what you get with many mainstream hardware wallets.

Summary and Conclusion

The CoolWallet Pro is a practical option for people who want a compact crypto hardware wallet that looks like an ordinary card. It’s easy enough to set up: install the app, pair over Bluetooth, update firmware if needed, generate your recovery phrase on the card, verify it carefully, enable your coins, and configure your security settings.

The most important things I’d recommend are:

  1. Use the card for seed generation when possible.
  2. Choose a 24-word seed if you can.
  3. Verify the seed without entering all values into one compromised device.
  4. Set an app password.
  5. Keep your phone locked and be selective about paired devices.
  6. Turn on destination address confirmation on card.
  7. Consider changing the displayed balance to a zero-value asset if you don’t want your Bitcoin balance visible in public.

If you want a discreet, travel-friendly hardware wallet that fits in your wallet, the CoolWallet Pro is worth considering. Just make sure you understand the trade-offs: it prioritizes form factor and phone-based convenience over some of the stronger verification features found on more mainstream hardware wallets.

Choosing a hardware wallet?

See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.

Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides