In this article, I’ll walk you through the Satochip retail smart-card products: the Satochip card, the SeedKeeper secure storage card, and the Satodime bearer card. These are cheap, open-source-style hardware options for Bitcoin users who want a different approach to cold storage. They are not for everyone, but if you understand the trade-offs, they can be useful.
You can also watch the video if you prefer seeing the setup and demos step by step.

What You Get From Satochip
When I ordered the retail cards, they arrived by regular mail. That is one of the advantages of smart-card hardware: it can be shipped in an ordinary envelope without looking like anything special.
The package included:
- A brochure summarising the products
- RF-blocking sleeves for the cards
- A sticker
- Separate sealed envelopes for each product
Each card envelope has a numbered security seal, which is useful if you are checking authenticity or handling second-hand cards.
For this guide, I used the retail versions. The same concepts also apply to DIY Satochip cards, though I would be much more careful trusting someone else’s DIY card with real funds.
Software Options for Satochip
Satochip can be used with a few different clients. At the time of recording:
- Sparrow supports Satochip in its official client
- Electrum-Satochip, a fork maintained by the Satochip team, supports more card-management features
- Standard Electrum releases did not support Satochip at that point
For this demo, I used Electrum-Satochip because it gives access to more of the card’s security and management options.

Setting Up Satochip With Electrum-Satochip
Here is how I initialised a new Satochip card using the desktop software.
1. Install Electrum-Satochip and connect a reader
- Go to the Satochip quick-start page
- Download the Windows client for Electrum-Satochip
- Install it with default settings
- Plug in any USB smart-card reader
- Launch Electrum

2. Create a new hardware wallet
In Electrum:
- Start a new wallet
- Name it something like
Satochip demo - Choose Standard wallet
- Select Hardware device
- Insert the Satochip card into the reader
- Set a PIN
- Create a BIP39 seed on the computer
- Write the seed down
- Re-enter the seed to confirm it
- Finish using the default native Segwit path
At this point, the wallet is usable in Electrum. You can generate receive addresses and send Bitcoin from there.

Important Security Warning: Hot Seed Generation
This is the part where I need you to slow down.
In the basic setup above, the BIP39 seed is generated on a normal computer and then imported into the smart card. That is convenient, but it is not as secure as generating the seed offline.
The reason this workflow exists is that these smart cards do not have enough processing power or a screen to generate and display a full seed phrase securely by themselves.
If you want a more secure initialisation process, consider one of these options:
- Use SeedKeeper to generate the master seed on-card
- Use an offline system such as Tails Linux
- Use a modified SeedSigner build with NFC/smart-card support
For most people who are serious about cold storage, I would not recommend relying only on seed generation from an ordinary internet-connected computer.
Sending Bitcoin and Blind Signing Risk
Once the card is initialised, you can send Bitcoin normally through Electrum-Satochip. In the demo, I sent funds to myself using the same address for simplicity.
The important thing to notice is that there was no meaningful transaction confirmation on the card itself. This is called blind signing.
When Satochip is plugged in and unlocked with the correct PIN, it will sign Bitcoin transactions sent to it by the connected wallet software. If your computer or wallet software is compromised, malicious software could alter a transaction before the card signs it.
This does not mean you should never use blind signing. It means you need to understand what you are accepting. A screen-based hardware wallet can show you more of the transaction details directly on the device. Satochip takes a different approach: it relies heavily on your host system and, optionally, phone-based 2FA.
Enabling Satochip 2FA With a Phone App
Satochip has a useful two-factor authentication feature that helps reduce blind signing risk without buying another dedicated hardware wallet with a screen.
When 2FA is enabled:
- The transaction is generated by your wallet software
- It is encrypted using information from the smart card
- A request is sent to an independent phone app
- You review and approve or reject it on the phone
- Only after approval does Satochip sign the transaction
This also applies to sensitive card actions, such as resetting the seed or changing the PIN.
How to enable 2FA
- In Electrum-Satochip, open the wallet management menu
- Choose Enable 2FA
- Install the Satochip 2FA mobile app on your phone
- Scan the QR code shown on screen with the phone app
- Confirm that 2FA is enabled

Once enabled, sending a transaction will show a signing request on your phone. You can approve or reject it there.

Change Outputs Are Not Clearly Marked in the 2FA App
One thing that took me a moment to understand is how change outputs appear.
In Electrum, when you preview a transaction, it can show:
- The input
- The destination output
- The change output
Electrum may highlight the change output for you. However, the Satochip 2FA app does not identify which output is yours and which is change in the same way many screen-based hardware wallets do. So on your phone, you may see both outputs without a clear “change” label.
This is not automatically dangerous, but it changes how carefully you need to review transactions. You also need to remember that Satochip does not provide receive address verification on-card. If you want to double-check addresses, use a separate watch-only wallet. I cover that in another video on my channel.

SeedKeeper: Secure Seeding and Backup Without Vendor Lock-In
The next product is SeedKeeper. It comes as another smart card, but its job is different. Instead of being the main wallet device, it acts as a secure storage and transfer tool for seeds and master keys.
This is where Satochip starts to feel more interesting than just “a cheap blind-signing card.” SeedKeeper lets you generate a master seed on-card and then securely import it into Satochip without typing the secret into your computer in plaintext.

Setting up SeedKeeper
- Go to the Satochip getting-started page
- Select SeedKeeper
- Download the desktop tool
- Insert the SeedKeeper card into a smart-card reader
- Open the SeedKeeper Tool
- Set a PIN when first using the card
- Optionally add a label

Once open, you can import secrets, export them, make encrypted backups, list stored secrets, and generate a secret on-card.
Generating a Master Seed on SeedKeeper
The key feature I want to show is Generate Secret on-card.
This creates a master seed directly on the SeedKeeper card. In the demo, I generated a 64-byte master seed. You can also choose export rights:
- Plaintext export, so you can view it in the app
- Encrypted-only export, so it cannot simply be displayed as plaintext
For the demonstration, I chose plaintext export so I could show what the secret looks like and how recovery works. In a real high-security setup, encrypted-only export may be preferable depending on your threat model and backup strategy.

Importing the SeedKeeper Secret Into Satochip Securely
This part involves moving an encrypted secret from one card to another. It is more juggling than I would like, but it works well once you understand what each step is doing.
1. Export the authentic key from Satochip
First, insert and unlock your Satochip card. The SeedKeeper tool can import the Satochip card’s authentic public key into its trust store.

2. Encrypt-export the master seed from SeedKeeper
Next, on the SeedKeeper card:
- Choose Export a Secret
- Select the master seed you generated
- Encrypt it using the Satochip authentic key
- Copy the exported encrypted JSON to your clipboard

3. Secure-import it into Satochip
Then:
- Remove SeedKeeper and insert Satochip
- Unlock Satochip with its PIN
- Choose Import a Secret
- Select secure import from JSON
- Paste the encrypted export
- Confirm that you want to use the authentic key found in the trust store
- Complete the import
At this point, Satochip has been seeded using a master seed generated on SeedKeeper. That means your initialisation did not require typing a plaintext BIP39 seed into an ordinary computer.
Recovering or Inspecting the Wallet Without Satochip
One of the big advantages of SeedKeeper is that it does not lock you into one wallet ecosystem.
In the demo, I exported the master seed from SeedKeeper as plaintext and pasted it into Ian Coleman’s BIP39 tool using a BIP84 derivation path. The resulting addresses matched what Electrum-Satochip showed.
This is useful to know, but you should not need to do this during normal operation. The point is that the underlying key material can be recovered or inspected with standard tools if needed. That is different from some card-based wallets where your backups only work with the vendor’s own hardware and software.
If you have an existing BIP39 mnemonic, SeedKeeper can also store it. You can import a mnemonic seed directly into the tool. However, entering that seed phrase on a computer has the same security caveat as before: do it in a secure offline environment if possible, such as Tails Linux.
You can also use a modified SeedSigner build to generate seeds securely and then store them on SeedKeeper. That is a useful workflow for people who want air-gapped seed generation combined with smart-card backup.
One important limitation: SeedKeeper does not appear to offer an easy way to delete secrets once they are stored on the card. You can store roughly 20 to 30 secrets, but do not fill it up with test seeds unnecessarily.
Adding a BIP39 Passphrase
If you want to use a BIP39 passphrase with Satochip, you need to add it when initialising the card. The reason is that the derivation from seed words plus passphrase into the master key happens on your system before being used by the card. Once baked in, the passphrase cannot simply be changed later in the same way as some other wallet setups.
So if passphrase support matters to you, plan for it during initialisation.
Satodime: A Bearer Card for One-Way Transfers
The last product is Satodime. This one is different from Satochip and SeedKeeper. It is not intended for long-term storage of funds in the same way. Instead, it is designed as a bearer card for transferring Bitcoin to someone else.

How Satodime works
- Install the Satodime mobile app
- Tap the card to your phone using NFC for first-time ownership transfer
- You get access to three key slots
- Seal a slot to generate a private key on-card
- Send funds to the resulting address
- Hand the physical card to the recipient
The private key stays sealed on the card until someone unseals it. When unsealed, you can view the private key and import or sweep it into another wallet.

The idea is that you can create a Bitcoin address whose private key has never been exposed, send funds to it, and then give the card to someone else. The recipient can later unseal the key and take ownership of the coins.
Ownership Transfer: NFC vs Wired Connection
There is one very important behaviour difference with Satodime.
Ownership transfer works differently depending on how the card is connected:
- Over NFC, transfer behaves more like a controlled handoff
- Over a wired connection, you can force an ownership transfer at any time
That wired override acts as a recovery mechanism. If someone hands you a Satodime card, you should be able to reclaim ownership through a wired connection without trusting whatever phone or NFC state the previous owner left it in. At the same time, this prevents someone who merely taps the card with their phone from casually claiming ownership and draining funds.
This is a clever design choice, but it means you need to understand how transfer works before relying on Satodime for real transfers.

Resetting Satodime Slots Can Permanently Lose Funds
Satodime slots can be reset back to a blank state after their private key has been revealed. That is useful if you want to reuse a slot, but it comes with a harsh warning:
If you reset a slot while funds remain on that address, those funds are unrecoverably lost.
There is no normal backup path for Satodime in the way there is for Satochip plus SeedKeeper. It is a bearer instrument, not your main cold-storage setup. Use it with care.
If you have ever lost access to coins because of a reset, forgotten seed, or damaged backup, I cover recovery and consultation options on my recovery services page. But the best approach is still prevention: understand exactly what each device does before putting real funds at risk.
Checking Card Authenticity
Because these cards can be DIY or retail, authenticity matters. Satochip provides ways to verify that a card is genuine. I would always check this before trusting a card with significant funds, especially if it came from someone else rather than directly from the vendor.
For Satodime in particular, receiving a DIY card from an unknown person should be treated with suspicion. A fake or compromised card could undermine the whole point of using a bearer device.
Final Thoughts: Who Is This For?
Satochip is not trying to replace every hardware wallet on the market. It is a low-cost smart-card option for Bitcoin users who are comfortable understanding trade-offs.
The strengths I see are:
- Very accessible price
- Open-source-friendly approach
- Useful card verification features
- SeedKeeper gives you flexible, non-locked-in backup options
- Phone-based 2FA improves security without buying another screen device
- Satodime is a neat one-way bearer transfer tool
The trade-offs are also real:
- Blind signing remains possible if 2FA is not used or understood properly
- There is no on-card receive address verification
- Change outputs may be less clearly presented in the 2FA app
- Retail cards do not get firmware upgrades after purchase
- Software support, especially mobile support, was still limited at the time of recording
For advanced users who want cheap smart-card-based cold storage and are willing to read the documentation, Satochip plus SeedKeeper is a genuinely interesting combination. It gives you more backup flexibility than many other card-style wallets, while keeping costs low.
Just do not treat it as a set-and-forget consumer product. Test your backups, understand your recovery path, enable 2FA where appropriate, and never reset or wipe anything without knowing exactly what will happen to the funds.
Choosing a hardware wallet?
See how this device stacks up against the others I’ve tested: security model, supported coins, backup options and price.
Some links on this site are affiliate links: if you buy through them I may earn a commission at no extra cost to you. It doesn’t change what I recommend.
Found this useful?
These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.







