Secure Offline Seed Setup for Tangem Wallet (Air-Gapped Initialisation)

Secure Offline Seed Setup for Tangem Wallet (Air-Gapped Initialisation)

A few years ago, I reviewed the Tangem wallet as a simple smart-card-based self-custody option. It is easy to understand, easy to carry, and useful if you want something less fiddly than a full hardware wallet. But there was one big problem with seed-based setup: the phone had to be online during parts of the process where your recovery phrase was being handled.

That made the seed “hot.” In plain English, that means your most sensitive secret touched an internet-connected device while you were setting up the cards. For many self-custody users, that is not acceptable.

Tangem has now released a workflow that fixes this issue for Android users: you can scan your Tangem cards once while online to load their certificates, then disconnect from the internet and complete seed-based wallet creation and card backup offline.

Watch the video

This article is a written version of that process, with the security reasoning explained step by step.

Tangem seed hot issue schematic showing phone handling unencrypted keys
The old problem: seed-based setup could require the phone to be online while handling sensitive key material.

Why this update matters

A Tangem card is a smart-card wallet. You tap it against your phone, and the app handles signing transactions on the card. That makes daily use convenient, especially for small-to-medium amounts where you do not want the extra friction of a full hardware wallet with a screen.

However, convenience should not come at the cost of basic security hygiene. If your recovery phrase is entered into a phone that then needs to call home to finish setup, that phone is now in a more sensitive position than before. It has had access to secret material while connected to the network.

The old process was especially problematic if you wanted to do an air-gapped initialisation: create or import a seed on a disconnected device, then back it up to your Tangem cards without ever putting that seed online.

Tangem’s newer Android workflow improves this by separating two phases:

  1. Online certificate loading: Scan each card once while connected to the internet so the app can attest the card and store the certificates needed for offline backup.
  2. Offline initialisation: Disconnect from the network, enter your seed, add the cards, set an access code, and finalise the backup without any network connection.

That is a meaningful improvement. It does not make Tangem perfect, but it removes one of the most important objections to using seed-based Tangem wallets.

What you need before starting

You will need:

  • A phone with the updated Tangem app installed.
  • Your Tangem cards, in this demonstration a three-card set.
  • A secure offline device or phone that you are willing to use only for initialisation and then wipe.
  • Your recovery phrase written down on paper or another offline medium you trust.
  • A second phone for normal daily use after setup is complete.

I used an Android phone for the initialisation demo because the updated workflow being discussed here applies to the newer Android version of the Tangem app. If you are using a different platform, check whether your app version supports the same offline seed-based flow before relying on it.

Full disclosure: the Tangem cards used in the demonstration were sent to me by Tangem after my earlier video. That does not change the security assessment, but I want to be transparent about where the demo hardware came from.

Step 1: Update the Tangem app

First, make sure your phone has the newer version of the Tangem app that supports this offline-capable seed initialisation process.

In the video, I checked the Android store and updated the app before starting. You should do the same. Do not try to run this workflow on an older build if you are relying on the new behaviour.

Updated Tangem app in Google Play Store next to a sealed Tangem card box
Update the Tangem app first so you have the version that supports the improved offline seed setup flow.

This is not the kind of step where you can guess and hope. If the app does not support the new process, you may end up repeating part of the setup or, worse, assuming something was completed securely when it was not.

Step 2: Understand why the old offline attempt failed

Before doing the correct process, I demonstrated what happens if you try to do a seed-based setup fully from the start with no internet connection.

The app can warn that online attestation has failed. You may be able to continue in some cases, but later steps can still fail because the app needs card certificates that were not loaded during an online scan.

This is important: you cannot skip the online certificate-loading step and then expect the rest of the process to work offline.

The old problem was not simply “the phone is offline.” The deeper issue was that the seed-based setup required network access after sensitive data had already been entered or processed on the device. That made the whole thing less secure than it should be.

Old Tangem app showing online attestation failed when attempting fully offline scan
Trying to start everything offline can fail because card certificates have not yet been loaded.

The new workflow avoids this by doing the only necessary online part first: scanning each card while connected. After that, the sensitive seed entry and backup steps can happen with no network connection.

Step 3: Scan all Tangem cards while online

With your phone connected to the internet, open the Tangem app and scan each card one at a time.

In the demonstration, I scanned all three cards in the set. This step does two things:

  1. It helps attest that the cards are genuine.
  2. It saves the certificates needed later so the app can back up to those cards offline.

Do this for every card you intend to use as part of the wallet backup. If you have a three-card set, scan all three. Do not skip one and assume it will work later.

Tangem app welcome screen with Scan Tangem button before scanning cards online
Scan each card while online to load the certificates required for offline backup.

This is the only part of the process where your phone needs to be connected to the internet for the initialisation itself. It does not mean you are entering your seed while online. You are simply preparing the cards and loading the data the app needs to work with them later without a network connection.

After scanning all cards, you should have each card recognised by the app and ready for offline backup.

Step 4: Disconnect the phone from the internet

Now comes the security-critical step.

Before entering your recovery phrase or creating the seed-based wallet, disconnect the phone from the internet. In the video, I turned off Wi-Fi. For a more thorough approach, you can use flight mode and disable Bluetooth if possible, depending on how paranoid you want to be about local wireless exposure.

The key point is that the following steps should happen with no network connectivity:

  • Choosing seed-based wallet creation.
  • Entering your recovery phrase.
  • Adding each Tangem card as a backup device.
  • Setting an access code.
  • Finalising the backup.
Phone quick settings panel showing Wi-Fi turned off before offline initialisation
Turn off Wi-Fi or use flight mode before entering your seed and adding cards.

This is where the new process becomes genuinely useful. You are keeping the most sensitive part of setup away from the network. The phone still has to be a device you trust, but at least it is not connected while handling your recovery phrase.

Step 5: Create the seed-based wallet offline

Once the phone is disconnected, open the Tangem app and choose the option for creating a seed-based wallet.

In the demonstration, I selected a 12-word seed because it was easier to show on camera. For real use, you should follow whatever recovery phrase length your setup requires or what you are comfortable managing securely. The important thing is that the process can be completed offline after the cards have been scanned online earlier.

Enter your recovery phrase carefully. Do not type it into a note app, do not photograph it on the same phone if you can avoid it, and do not leave the screen unattended while entering it.

This step should feel similar to importing or creating a wallet from a seed in other wallets: you are telling the device which secret material it will use. The difference here is that, with the updated Tangem workflow, this does not have to happen while the phone is online.

Step 6: Add each Tangem card as a backup

After entering the recovery phrase, add your Tangem cards one by one.

In the demonstration, I added the first card, then continued adding the remaining cards until all three were included in the backup set. Because the certificates had already been loaded during the online scan step, this part completed without needing to query the network again.

This is also noticeably smoother than before. The app does not have to perform the same online checks for each card while you are in the middle of a sensitive setup flow.

Make sure every card you want to use as a backup is added and confirmed by the app. If you stop early, you may end up with an incomplete backup set.

Step 7: Set a longer access code

When prompted, set an access code for the wallet.

This is not just a formality. Tangem has had previously disclosed issues related to PIN brute-force attacks, and that history matters when choosing how much protection you want around your cards. A short PIN can be faster in daily use, but it also reduces the cost of an attacker trying guesses if they ever get physical access to one of your cards.

In the video, I used a simple four-digit example for demonstration only. For real funds, especially anything beyond small amounts, you should strongly consider using a longer access code than the minimum.

Do not write the PIN on the same paper as your seed unless you understand that this creates a single point of failure. Ideally, store your recovery phrase and your access code separately, both offline, in secure locations.

Step 8: Finalise the backup

After adding your cards and setting the access code, finalise the backup.

At this stage, the app should indicate that your Tangem cards have been added as backup devices. Once you complete finalisation, the cards are initialised with the wallet data from the seed entered on the offline phone.

Tangem app showing backup devices added and Finalize backup option
Finalise the backup after adding all Tangem cards while the phone remains offline.

After this point, you should not need to keep using the initialisation phone for normal wallet access. The important next step is cleaning that device.

Step 9: Clear app data or factory reset the setup phone

This is one of the most important parts of the whole process.

The phone used to enter your recovery phrase has now been in a position where it handled sensitive secret material. Even if it was offline, you should treat it as compromised for this purpose unless you have strong reasons to trust every layer of that device: the operating system, the app, the keyboard input path, any background processes, and so on.

At minimum, clear the data for the Tangem app after setup is complete. If you want a cleaner separation, factory reset the phone entirely before using it again for anything else.

In practice:

  • Minimum: Clear the Tangem app data.
  • Better: Factory reset the initialisation phone.
  • Best: Use a dedicated device or old phone only for this kind of sensitive setup work, then wipe it and set it aside.

The goal is to avoid leaving your recovery phrase, cached wallet state, or related application data sitting on a general-purpose phone that will later be used online with email, banking apps, social media, and other normal activity.

Step 10: Use the initialised cards on another phone

Once the Tangem cards have been securely initialised offline, you can use them on another device for day-to-day access.

In the demonstration, I switched to an iPhone, installed or opened the Tangem app, scanned one of the cards, entered the access code, and continued setup on that phone.

The app may show a warning saying the wallet was already activated earlier. That is expected in this scenario because you deliberately initialised the cards on the first phone. The warning exists to protect people from buying used or pre-activated Tangem cards, which can be a serious scam risk if someone else has already set up the wallet.

If you are setting up your own brand-new cards and you know they were activated by you moments earlier, you can confirm ownership and continue. If you bought cards that arrive pre-activated and you do not recognise the prior setup, stop and treat it as a red flag.

iPhone Tangem app showing security alert that wallet was already activated
Using previously initialised cards on another phone can trigger an activation warning; confirm only if you know why.

After confirming ownership, enter the access code again when prompted and synchronise addresses. Once this is done, your Tangem cards are ready to use with that second phone.

What this does not fix: blind signing limitations

This update fixes a serious initialisation problem, but it does not change everything about how Tangem works.

Tangem remains a blind signer in the sense discussed in my other wallet-type videos. That means you should understand what “blind” means before deciding whether it is appropriate for your situation. You are relying on the app to show transaction details and addresses, rather than having a more independent hardware display that lets you verify signing data directly on the device itself.

For small-to-medium amounts and regular transactions, this can be acceptable. Tangem cards are easy to use, simple to understand, and much less cumbersome than a full hardware wallet for everyday spending or smaller transfers.

But if you plan to store large amounts long-term, I would still recommend using a proper hardware wallet with a screen that lets you verify receive addresses and outbound transactions more independently. Convenience is useful, but it should not become the main reason you accept higher risk on significant funds.

Practical security recommendations for Tangem seed setup

If you are going to use this workflow, here is how I would approach it in practice:

  1. Use a clean phone for initialisation. Ideally an Android device that has not been used for sensitive online activity recently.
  2. Update the app first. Do not assume your current version supports the offline seed flow.
  3. Scan all cards online before going offline. This loads the certificates needed for backup.
  4. Disconnect completely before entering the seed. Wi-Fi off is a minimum; flight mode is better if you want stronger isolation.
  5. Enter the recovery phrase carefully. Avoid screenshots, cloud notes, or browser-based password managers on that device.
  6. Use a longer access code than the minimum. This matters more than people often think, especially given Tangem’s past brute-force vulnerability concerns.
  7. Finalise all backups before touching the phone again for normal use. Make sure every intended card is included.
  8. Wipe the initialisation phone. Clear app data at minimum; factory reset if you want a cleaner separation.
  9. Use the cards on your normal phone afterward. Confirm ownership warnings only when you know exactly why they appeared.
  10. Do not use pre-activated cards from unknown sources. If someone else has already activated them, that is a major warning sign.

Is Tangem now suitable for long-term storage?

It depends on what you mean by “suitable.”

For many people, Tangem can be a good option for holding smaller amounts with better self-custody than keeping everything in an exchange or software wallet. The new offline seed initialisation makes it more defensible as part of a personal setup, especially if you want card-based backups without being locked into one vendor’s app forever.

Seed-based wallets are still generally better for long-term storage because the recovery phrase gives you a path that is not dependent on any single device or vendor ecosystem. That is an important advantage.

But I would not recommend putting large long-term savings into a blind-signer setup without carefully weighing the trade-offs. If you have significant funds, a full hardware wallet with proper transaction verification is usually the safer default.

Final thoughts

This Tangem update is worth highlighting because it fixes a specific issue I called out in my earlier review: seed-based initialisation used to make the recovery phrase hot by forcing online steps after sensitive data was involved.

The new workflow gives self-custody users a more sensible path: load card certificates online first, then perform the actual seed entry and backup offline. That is not perfect security, but it is much better than before.

If you are considering Tangem cards, this improvement makes them more usable for people who care about keeping their recovery phrase away from the network during setup. Just remember to wipe the initialisation phone, use a strong access code, understand the blind-signing limitations, and keep large long-term funds on hardware with better verification if that is what your situation requires.

Stuck with a wallet recovery?

I maintain BTCRecover and have helped people recover seed phrases, passphrases and wallet passwords since 2019. Book a one-hour video session and I’ll walk you through doing the recovery yourself, without sharing your seed. Or, if you’d rather I run it, a trusted recovery is charged only if it succeeds.

Private sessions: US$100 per hour. Trusted recovery: 10% of recovered funds. I never contact people first and will never ask for your seed phrase over chat or email.

Found this useful?

These guides are free and ad-free. You can support them by sharing them, subscribing on YouTube, or sending a tip.

Stuck on this?

Book a one-hour session and I’ll walk you through it, or ask about a trusted recovery.

Recovery guides

More guides